User Manual

3-34 Chapter 3: BIOS setup
3.6 Power menu
The Power menu items allow you to change the settings for the Advanced
Power Management (APM). Select an item then press <Enter> to display the
configuration options.
3.6.1 Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state
to be used for system suspend.
[S1 (POS) only] Sets the APCI suspend mode to S1/POS (Power On Suspend).
[S3 only] Sets the APCI suspend mode to S3/STR (Suspend To RAM).
[Auto] The system automatically configures the ACPI suspend mode.
3.6.2 Repost Video on S3 Resume [No]
Determines whether to invoke VGA BIOS POST on S3/STR resume.
[No] When set to [No], the system will not invoke VGA BIOS POST on
S3/STR resume.
[Yes] When set to [Yes], the system invokes VGA BIOS POST on S3/
STR resume.
3.6.3 ACPI 2.0 Support [Disabled]
[Disabled] When set to [Disabled], the system will not add additional tables as
per ACPI 2.0 specifications.
[Enabled] When set to [Enabled], the system adds additional tables as per
ACPI 2.0 specifications.
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
Rampage III GENE BIOS SETUP Version 0213
Extreme Tweaker Main AdvancedMain Advanced Power Boot Tools Exit
Select the ACPI state
used for System
Suspend.
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Suspend Mode [Auto]
Repost Video on S3 Resume [No]
ACPI 2.0 Support [Disabled]
ACPI APIC Support [Enabled]
EuP Ready [Disabled]
APM Conguration
Hardware Monitor