User Manual

3-16 Chapter 3: BIOS setup
3.3.29 DRAM Bus Voltage [Auto]
Allows you to set the DRAM voltage. The values range from 1.20575V to 2.50425V
with a 0.01325V interval.
3.3.30 DRAM REF Voltages
DRAM DATA REF Voltage on CHA/B/C [Auto]
Allows you to set the DRAM DATA Reference Voltage on Channel A/B/C. The
values range from -157.5mV to +200mV with a 12.5mV interval. Different ratio
might enhance DRAM overclocking ability.
DRAM CTRL REF Voltage on CHA/B/C [Auto]
Allows you to set the DRAM Control Reference Voltage on Channel A/B. The
values range from -157.5mV to +200mV with a 12.5mV interval. Different ratio
might enhance DRAM overclocking ability.
3.3.31 CPU Spread Spectrum [Auto]
[Disabled] Enhances the BCLK overclocking ability.
[Auto] Sets to [Auto] for EMI control.
3.3.32 PCIE Spread Spectrum [Auto]
[Disabled] Enhances the PCIE overclocking ability
[Auto] Sets to [Auto] for EMI control.
3.3.33 CPU Clock Skew [Auto]
Adjusting this item may help enhancing BCLK overclocking ability. You may need
to adjust the IOH Clock Skew item at the same time.
Configuration options: [Auto] [Normal] [Delay 100ps]–[Delay 1500ps]
3.3.34 IOH Clock Skew [Auto]
Adjusting this item may help enhancing BCLK overclocking ability. You may need
to adjust the CPU Clock Skew item at the same time.
Configuration options: [Auto] [Normal] [Delay 100ps]–[Delay 1500ps]