User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- 2.1 Building your PC system
- 2.1.1 CPU installation
- 2.1.2 Cooling system installation
- 2.1.3 DIMM installation
- 2.1.4 M.2 installation
- 2.1.5 Motherboard installation
- 2.1.6 ATX power connection
- 2.1.7 SATA device connection
- 2.1.8 Front I/O connector
- 2.1.9 Expansion card installation
- 2.1.10 ROG GEN-Z.2 installation
- 2.1.11 Wi-Fi moving antenna installation
- 2.1.12 ROG FAN CONTROLLER installation
- 2.2 BIOS update utility
- 2.3 Motherboard rear and audio connections
- 2.4 Starting up for the first time
- 2.5 Turning off the computer
- 2.1 Building your PC system
- Chapter 3: BIOS and RAID Support
- Appendix
1-8
Chapter 1: Product Introduction
Chapter 1
Recommended VGA configuration
Slot Description Single VGA Dual VGA
1 PCIEX16_1 x16 x8
2 PCIEX16_2 - x8
Connect a chassis fan to the chassis fan connectors when using multiple graphics cards
for better thermal environment.
When M.2_2 is enabled, PCIEX16_1 will run x8 and PCIEX16_2 will run x4.
PCIe bifurcation & M.2 settings in PCIe x16 slot for PCIe 5.0 M.2 Card
Slot Description
Quantity of identifiable M.2 SSD (pc)
Situation for PCIe 5.0 M.2 Card
M.2
2 PCIEX16_2 PCIe 5.0 x4
• The PCIe 5.0 M.2 Card is bundled as an accessory.
• When the PCIe 5.0 M.2 card is installed on the PCIEX16_2 slot, PCIEX16_1 will run
x8 only.
• Please enable the PCIE Gen5 Redriver Driving in the BIOS setting. This item allows
you to maximize the PCIE Gen5 M.2 Device performance from the Add-on Card
installed on the PCIEX16_2 slot which is optimized by ASUS redriver.