User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- 2.1 Building your PC system
- 2.1.1 CPU installation
- 2.1.2 Cooling system installation
- 2.1.3 DIMM installation
- 2.1.4 M.2 installation
- 2.1.5 Motherboard installation
- 2.1.6 ATX power connection
- 2.1.7 SATA device connection
- 2.1.8 Front I/O connector
- 2.1.9 Expansion card installation
- 2.1.10 ROG GEN-Z.2 installation
- 2.1.11 Wi-Fi moving antenna installation
- 2.1.12 ROG FAN CONTROLLER installation
- 2.2 BIOS update utility
- 2.3 Motherboard rear and audio connections
- 2.4 Starting up for the first time
- 2.5 Turning off the computer
- 2.1 Building your PC system
- Chapter 3: BIOS and RAID Support
- Appendix
1-10
Chapter 1: Product Introduction
Chapter 1
6. Liquid Cooling System headers
The Liquid Cooling System headers allow you to connect sensors to monitor the
temperature and flow rate of your liquid cooling system. You can manually adjust the
fans and water pump to optimize the thermal efficiency of your liquid cooling system.
5. Water Block header
The Water Block header allows you to connect sensors to monitor the temperature,
flow rate, and water leak signals of your third party monoblocks. You can manually
adjust the fans and water pump to optimize the thermal efficiency of your third party
monoblocks.