User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- 2.1 Building your PC system
- 2.1.1 CPU installation
- 2.1.2 Cooling system installation
- 2.1.3 DIMM installation
- 2.1.4 M.2 installation
- 2.1.5 Motherboard installation
- 2.1.6 ATX power connection
- 2.1.7 SATA device connection
- 2.1.8 Front I/O connector
- 2.1.9 Expansion card installation
- 2.1.10 ROG GEN-Z.2 installation
- 2.1.11 Wi-Fi moving antenna installation
- 2.1.12 ROG FAN CONTROLLER installation
- 2.2 BIOS update utility
- 2.3 Motherboard rear and audio connections
- 2.4 Starting up for the first time
- 2.5 Turning off the computer
- 2.1 Building your PC system
- Chapter 3: BIOS and RAID Support
- Appendix
ROG CROSSHAIR X670E EXTREME
1-25
Chapter 1
24. ProbeIt Measurement Points
The ROG ProbeIt allows you to detect your system’s current voltage and OC settings
using a multimeter. You can also measure the ProbeIt points during overclocking.
Using ProbeIt
Connect one of the probe onto the GND ProbeIt point, then connect the other probe
onto another ProbeIt point to measure the corresponding voltage information.
The illustration above is for reference only, the actual motherboard layout and measure
points may differ by model.