User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- 2.1 Building your PC system
- 2.1.1 CPU installation
- 2.1.2 Cooling system installation
- 2.1.3 DIMM installation
- 2.1.4 M.2 installation
- 2.1.5 Motherboard installation
- 2.1.6 ATX power connection
- 2.1.7 SATA device connection
- 2.1.8 Front I/O connector
- 2.1.9 Expansion card installation
- 2.1.10 ROG GEN-Z.2 installation
- 2.1.11 Wi-Fi moving antenna installation
- 2.1.12 ROG FAN CONTROLLER installation
- 2.2 BIOS update utility
- 2.3 Motherboard rear and audio connections
- 2.4 Starting up for the first time
- 2.5 Turning off the computer
- 2.1 Building your PC system
- Chapter 3: BIOS and RAID Support
- Appendix
ROG CROSSHAIR X670E EXTREME
2-3
Chapter 2
2.1.2 Cooling system installation
CPU heatsink and fan assembly Type 1
Apply the Thermal Interface Material to the CPU
cooling system and CPU before you install the
cooling system, if necessary.
We recommend using AM5 compatible coolers
with stock AM5 backplate to prevent potential
damages to the pins in the socket.