User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- 2.1 Building your PC system
- 2.1.1 CPU installation
- 2.1.2 Cooling system installation
- 2.1.3 DIMM installation
- 2.1.4 M.2 installation
- 2.1.5 Motherboard installation
- 2.1.6 ATX power connection
- 2.1.7 SATA device connection
- 2.1.8 Front I/O connector
- 2.1.9 Expansion card installation
- 2.1.10 ROG GEN-Z.2 installation
- 2.1.11 Wi-Fi moving antenna installation
- 2.2 BIOS update utility
- 2.3 Motherboard rear and audio connections
- 2.4 Starting up for the first time
- 2.5 Turning off the computer
- 2.1 Building your PC system
- Chapter 3: BIOS and RAID Support
- Appendix
ROG CROSSHAIR X670E GENE
1-13
Chapter 1
9. USB 3.2 Gen 2x2 Type-C
®
Front Panel connector
The USB 3.2 Gen 2x2 Type-C
®
connector allows you to connect a USB 3.2 Gen 2x2
Type-C
®
module for additional USB 3.2 Gen 2x2 ports on the front panel. The USB 3.2
Gen 2x2 Type-C
®
connector provides data transfer speeds of up to 20 Gb/s and PD
3.0 / QC 4+ support for up to DC 5V/3A 60W fast charging technology.
• The USB 3.2 Gen 2x2 Type-C
®
module is purchased separately.
• For PD 3.0 / QC 4+ support, ensure to connect the 6-pin PD_12V_PWR connector.
• PD 3.0 up to DC 5V/3A 60W fast charging technology is only supported on CC Logic
Devices.
• In S5 (Soft Off State) PD 3.0 and QC 4+ only provide power delivery of up to 10W.