User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- 2.1 Building your PC system
- 2.1.1 CPU installation
- 2.1.2 Cooling system installation
- 2.1.3 DIMM installation
- 2.1.4 M.2 installation
- 2.1.5 Motherboard installation
- 2.1.6 ATX power connection
- 2.1.7 SATA device connection
- 2.1.8 Front I/O connector
- 2.1.9 Expansion card installation
- 2.1.10 ROG GEN-Z.2 installation
- 2.1.11 Wi-Fi moving antenna installation
- 2.2 BIOS update utility
- 2.3 Motherboard rear and audio connections
- 2.4 Starting up for the first time
- 2.5 Turning off the computer
- 2.1 Building your PC system
- Chapter 3: BIOS and RAID Support
- Appendix
1-24
Chapter 1: Product Introduction
Chapter 1
24. Safe Boot button
The Safe Boot button temporarily applies safe settings to the BIOS while retaining the
overclocked settings, allowing you to modify the settings causing a boot failure. Press
this button at anytime to force the system to reboot into the BIOS safe mode.
25. Slow Mode switch
The system may crash due to the CPU being unstable when using extreme
overclocking settings. Enable the Slow Mode switch during LN2 benching to decrease
the processor frequency and stabilize the system, allowing you to keep track of the
overclocking data.