User Manual

1-26
Chapter 1: Product Introduction
Chapter 1
15. Addressable Gen2 LED connector
TheAddressableGen2LEDconnectorallowsyoutoconnectindividuallyaddressable
RGBWS2812BLEDstripsorWS2812BbasedLEDstrips.
TheAddressableRGBLEDconnectorsupportsWS2812BaddressableRGBLEDstrips
(5V/Data/Ground),withamaximumpowerratingof3A(5V)andamaximumof120LEDs.
Beforeyouinstallorremoveanycomponent,ensurethatthepowersupplyisswitchedoff
orthepowercordisdetachedfromthepowersupply.Failuretodosomaycausesevere
damagetothemotherboard,peripherals,orcomponents.
• ActuallightingandcolorwillvarywithLEDstrip.
• IfyourLEDstripdoesnotlightup,checkiftheaddressableRGBLEDstripis
connectedinthecorrectorientation,andthe5Vconnectorisalignedwiththe5V
header on the motherboard.
• TheaddressableRGBLEDstripwillonlylightup when the system is powered on.
• TheaddressableRGBLEDstripispurchasedseparately.