User Manual

3-16
Chapter 3: BIOS Setup
Chapter 3
SMART Self Test
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system
that shows a warning message during POST (Power-on Self Test) when an error occurs in
the hard disks.
Conguration options: [On] [Off]
SATA6G_1(Gray) - SATA6G_4(Gray)
SATA6G_1 - SATA6G_4
This item allows you to enable or disable the selected SATA port.
Conguration options: [Disabled] [Enabled]
Hot Plug
These items appears only when the SATA Mode is set to [AHCI] and allows you to
enable or disable SATA Hot Plug Support.
Conguration options: [Disabled] [Enabled]
3.6.4 Onboard Devices Configuration
The items in this menu allow you to switch between PCIe Lanes and congure onboard
devices.
HD Audio Controller
This item allows you to use the Azalia High Denition Audio Controller
Conguration options: [Disabled] [Enabled]
RGB LED lighting
When system is in working state
[All On] All RGB LEDs and Functional LEDs will be enabled.
[Stealth Mode] All RGB LEDs and Functional LEDs will be disabled.
[Aura Only] RGB LEDs will be enabled, Functional LEDs will be disabled.
[Aura Off] Functional LEDs will be enabled, RGB LEDs will be disabled.
Q-Code LED Function
[Disabled] Q-Code LED will be disabled.
[POST Code Only] Show POST (Power-On Self-Test) code and CPU temperature
on the Q-Code LED.
[Auto] Show POST (Power-On Self-Test) code on the Q-Code LED.
When system is in sleep, hibernate or soft off states
[All On] All RGB LEDs and Functional LEDs will be enabled.
[Stealth Mode] All RGB LEDs and Functional LEDs will be disabled.
[Aura Only] RGB LEDs will be enabled, Functional LEDs will be disabled.
[Aura Off] Functional LEDs will be enabled, RGB LEDs will be disabled.