Manualshelf

User Manual

ManualsBrandsASUS ManualsComputers & AccessoriesROG (X570) Crosshair VIII Impact, AMD, AM4, Ryzen 3000, (Mini-DTX) SFF Gaming Motherboard with PCIe 4.0, On-board Wifi 6 (802.11Ax), Intel LAN, SATA 6GB/s, USB 3.2 Gen 2, SO-DIMM.2 and Aura Sync
81828384858687888990
ROG CROSSHAIR VIII IMPACT
3-19
Chapter 3
3.6.7 USB Configuration
The items in this menu allow you to change the USB-related features.
The Mass Storage Devices item shows the auto-detected values. If no USB device is
detected, the item shows None.
Legacy USB Support
[Enabled] Your system supports the USB devices in legacy operating systems.
[Disabled] Your USB devices can be used for BIOS setup only and cannot be
recognized in the boot devices list.
[Auto] Your system automatically detects the presence of USB devices at startup.
If any USB devices are detected, the legacy USB support is enabled.
XHCI Hand-off
[Enabled] Enables the support for operating systems without an XHCI hand-off
feature.
[Disabled] Disables the XHCI Hand-off support.
USB Single Port Control
This item allows you to enable or disable the individual USB ports.
Refer to section 1.1.2 Motherboard layout for the location of the USB ports.
3.6.10 Network Stack Configuration
The items in this menu allow you to enable or disable the UEFI network stack
3.6.8 HDD/SSD SMART Information
This menu displays the SMART information of the connected devices.
3.6.9 NVMe Configuration
You may view the NVMe controller and Drive information if an NVMe device is connected.