User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- Chapter 3: BIOS Setup
- Chapter 4: RAID Support
- Appendix
ROG CROSSHAIR VI EXTREME
3-23
Chapter 3
Load from Profile
This item allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the
prole number that saved your BIOS settings, press <Enter>, and then select Yes.
• DO NOT shut down or reset the system while updating the BIOS to prevent the
system boot failure!
• We recommend that you update the BIOS le only coming from the same memory/
CPU conguration and BIOS version.
Profile Name
This item allows you to key in a prole name.
Save to Profile
This item allows you to save the current BIOS settings to the BIOS Flash, and create a
prole. Key in a prole number from one to eight, press <Enter>, and then select Yes.
Load/Save Profile from/to USB Drive
This item allows you to load or save prole from your USB drive, load and save prole to your
USB drive.
3.9.3 ASUS Overclocking Profile
This item allows you to store or load multiple BIOS settings.
Load Default
This item allows you to load the default values of the ROG OC Panel H-Key.
Save Above Settings
This item allows you to save the new values of the ROG OC Panel H-Key.
Load from profile
This item allows you to load the previous values of the ROG OC Panel H-Key.
3.9.4 ROG OC Panel H-Key Configure
The ROG OC Panel H-Key Congure allows you to input and save values that can be
synchronized to a compatible OC Panel device, and these values can be tweaked or
congured using the OC Panel without going to the BIOS menu.
3.9.5 ASUS SPD Information
This item allows you to view the DRAM SPD information.