Manualshelf

User Manual

ManualsBrandsASUS ManualsComputers & AccessoriesROG (X570) Crosshair VIII Impact, AMD, AM4, Ryzen 3000, (Mini-DTX) SFF Gaming Motherboard with PCIe 4.0, On-board Wifi 6 (802.11Ax), Intel LAN, SATA 6GB/s, USB 3.2 Gen 2, SO-DIMM.2 and Aura Sync
81828384858687888990
ROG CROSSHAIR VIII HERO
3-15
Chapter 3
PSS Support
This item allows you enable or disable the generation of ACPI_PPC, _PSS, and _PCT
objects.
Conguration options: [Disabled] [Enabled] [Auto]
NX Mode
This item allows you enable or disable no-execute page protection function.
Conguration options: [Disabled] [Enabled]
SVM Mode
This item allows you enable or disable CPU virtualization.
Conguration options: [Disabled] [Enabled]
3.6.2 CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically
detects.
The items in this menu may vary based on the CPU installed.
3.6.3 SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding
SATA port.
SATA0 Enable
This item allows you to enable or disable the SATA Device.
Conguration options: [Disabled] [Enabled]
SATA1 Enable
This item allows you to enable or disable the SATA Device.
Conguration options: [Disabled] [Enabled]
SATA Mode
This item allows you to set the SATA conguration.
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the
onboard storage driver to enable advanced Serial ATA features that
increases storage performance on random workloads by allowing
the drive to internally optimize the order of commands.
[RAID] Set to [RAID] when you want to create a RAID conguration from
the SATA hard disk drives.