Manualshelf

User Manual

ManualsBrandsASUS ManualsComputers & AccessoriesROG (X570) Crosshair VIII Impact, AMD, AM4, Ryzen 3000, (Mini-DTX) SFF Gaming Motherboard with PCIe 4.0, On-board Wifi 6 (802.11Ax), Intel LAN, SATA 6GB/s, USB 3.2 Gen 2, SO-DIMM.2 and Aura Sync
81828384858687888990
3-16
Chapter 3: BIOS Setup
Chapter 3
SMART Self Test
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system
that shows a warning message during POST (Power-on Self Test) when an error occurs in
the hard disks.
Conguration options: [On] [Off]
SATA6G_1(Gray) - SATA6G_8(Gray)
SATA6G_1 - SATA6G_8
This item allows you to enable or disable the selected SATA port.
Conguration options: [Disabled] [Enabled]
Hot Plug
These items appears only when the SATA Mode is set to [AHCI] and allows you to
enable or disable SATA Hot Plug Support.
Conguration options: [Disabled] [Enabled]
3.6.4 Onboard Devices Configuration
The items in this menu allow you to switch between PCIe Lanes and congure onboard
devices.
HD Audio Controller
This item allows you to use the Azalia High Denition Audio Controller
Conguration options: [Disabled] [Enabled]
PCIEX16_2 Bandwidth
[X8 Mode] Run at x8 mode.
[PCIe RAID Mode] Run at x4+x4 mode to create a RAID array for up to 2 PCIE
devices.
Use [PCIe RAID Mode] only when installing the Hyper M.2 x16 card or other M.2 adapter
cards. Installing other devices when using this mode may cause your PC to fail to boot.
RGB LED lighting
When system is in working state
[All On] All RGB LEDs and Functional LEDs will be enabled.
[Stealth Mode] All RGB LEDs and Functional LEDs will be disabled.
[Aura Only] RGB LEDs will be enabled, Functional LEDs will be disabled.
[Aura Off] Functional LEDs will be enabled, RGB LEDs will be disabled.
Q-Code LED Function
[Disabled] Q-Code LED will be disabled.
[POST Code Only] Show POST (Power-On Self-Test) code and CPU temperature
on the Q-Code LED.
[Auto] Show POST (Power-On Self-Test) code on the Q-Code LED.