SW8558 September 2013 Andra utgåvan Bärbar dator E-manual
Upphovsrättsinformation Ingen del av denna manual, inklusive produkter och programvara som beskrivs i den, får utan skriftligt tillstånd från ASUSTeK COMPUTER INC. reproduceras, överföras, kopieras, sparas i ett sökbart system eller översättas till något språk i någon form eller med några medel, förutom dokumentation som förvaras av köparen som säkerhetskopia. (“ASUS”).
Innehållsförteckning Om manualen....................................................................................................... 7 Konventioner som används i denna manual........................................... 8 Ikoner ............................................................................................................... 8 Typografi............................................................................................................... 8 Säkerhetsföreskrifter.......................
Kapitel 3: Arbeta med Windows® 8 Starta första gången........................................................................................42 Låsskärm i Windows® 8....................................................................................42 Windows® UI........................................................................................................43 Startskärm..........................................................................................................43 Windows®appar..........
Kapitel 5: Uppgradera din bärbara dator Installera en Random Access Memory- (RAM) modul.........................82 Byte av hårddisken (HDD)..............................................................................86 Installera ett nytt batteripaket......................................................................92 Tips och vanliga frågor Praktiska tips för din bärbara dator............................................................96 Vanliga frågor om hårdvara.....................................
Produktanmärkning Macrovision Corporation.................................. 120 CTR 21 godkännande(för bärbara datorer med inbyggt modem)................................................................................. 121 ENERGY STAR-efterlevande produkt..................................................... 122 EU:s eko-märkning....................................................................................... 123 Förhindra hörselskador....................................................................
Om manualen Manualen ger information om din bärbara dators maskinvaru- och programvaruegenskaper, och har delats in i följande kapitel: Kapitel 1: Konfiguration av maskinvaran Detta kapitel preciserar din bärbara dators maskinvarukomponenter. Kapitel 2: Använda din bärbara dator Detta kapitel visar hur du använder de olika delarna av din bärbara dator. Kapitel 3: Arbeta med Windows® 8 Detta kapitel ger en översikt över hur du använder Windows® 8 på din bärbara dator. Kapitel 4: Power-on-självtestet.
Konventioner som används i denna manual För att markera viktig information i denna manual, presenteras viss text på följande sätt: VIKTIGT! Detta meddelande innehåller vital information som måste följas för att fullfölja en uppgift. OBS! Detta meddelande innehåller ytterligare information och tips som kan hjälpa till att fullfölja en uppgift.
Säkerhetsföreskrifter Använda din bärbara dator Den här notebookdatorn ska användas i miljöer med lämplig temperatur mellan 5°C (41°F) och 35°C (95°F). Se etiketten med märkdata under Notebook PC:n för att se till att din strömadapter överensstämmer med märkdatan. Placera inte den bärbara datorn i knäet eller på någon annan del av kroppen, för att förhindra obehag eller skador från värmeexponeringen. Använd inte skadade elsladdar, tillbehör eller annan kringutrustning.
Sköt om din bärbara dator Koppla ifrån strömmen och ta bort batteriet (i förekommande fall) innan du rengör den bärbara datorn. Använd en ren cellulosasvamp eller sämskskinn som fuktats i en lösning av slipmedelsfritt rengöringsmedel och några droppar varmt vatten. Avlägsna resterande fukt från den bärbara datorn med en torr trasa. Använd inte starka lösningsmedel såsom thinner, bensen eller andra kemikalier på eller i närheten av den bärbara datorn. Placera inga föremål ovanpå den bärbara datorn.
Korrekt avyttring Kasta inte Notebook PC i hushållssoporna. Denna produkt har konstruerats för att möjliggöra korrekt återanvändning av delar och för återvinning. Symbolen med den överkorsade soptunnan indikerar att produkten (elektriska och elektroniska utrustningar samt knappcellsbatterier som innehåller kvicksilver) inte får kastas i de vanliga hushållssoporna. Kontrollera de lokala bestämmelserna för avyttring av elektroniska produkter. Kasta INTE batteriet i hushållssoporna.
E-manual för bärbar dator
Kapitel 1: Konfiguration av maskinvaran E-manual för bärbar dator 13
Lär känna din bärbara dator Sedd uppifrån OBS! Tangentbordets layout kan variera mellan olika länder. Utseendet uppifrån kan också variera beroende på den bärbara datorns modell.
Mikrofon Den inbyggda monomikrofonen kan användas för videokonferenser, röstberättande eller enkla ljudinspelningar. 3D Vision IR-port (på valda modeller) 3D Vision IR-porten överför 3D Vision-signaler till dina 3D-glasögon när du spelar 3D-videospel eller tittar på filer i 3D. Kamera Denna inbyggda kameran ger dig möjlighet att ta bilder eller spela in videor med den bärbara datorn. Skärmen Skärmen har utmärkta visningsegenskaper för fotografier, videor och andra multimediafiler på din bärbara dator.
Versallås-indikator Denna kontrollampa tänds när versallåsfunktionen är aktiverad. versallåset ger dig möjlighet att skriva stora bokstäver (versaler) (t.ex. A, B, C) med den bärbara datorns tangentbord. Tangentbord Tangentbordet har QWERTY-knappar i full storlek med en bekvämt nedtryckningsdjup för att skriva. Det gör det också möjligt att använda funktionsknapparna, ger snabb åtkomst till Windows® och kontrollerar andra multimediafunktioner.
Tvåfärgad batteriladdningsindikator Den tvåfärgade LED-belysningen visar batteriets laddningsstatus. Se följande tabell för detaljer: Färg Status Fast grönt Den bärbara datorn är ansluten till ett strömuttag, laddar batteriet och batteristyrkan ligger mellan 95 % och 100 %. Fast orange Den bärbara datorn är ansluten till ett strömuttag, laddar batteriet och batteristyrkan ligger under 95 %. Blinkande orange Den bärbara datorn körs med batteriet och batteristyrkan ligger på mindre än 10%.
Undersida OBS! Undersidan kan variera i utseende beroende på modell. VARNING! Den bärbara datorns undersida kan bli varm eller het när den används eller när batteriet laddas. Placera inte den bärbara datorn på ytor som kan blockera ventilerna när du arbetar med den. VIKTIGT! Batteritiden varierar beroende på användning och efter specifikationerna för denna bärbara dator. Batteriet kan inte tas isär.
Batteripaket Batteriet laddas automatiskt när den bärbara datorn ansluts till en strömkälla. När det laddats ger det ström till din bärbara dator. Fjädrande batterilås Det fjädrande batterilåset låser automatiskt batteriet på plats när det sätts in i batterifacket. VIKTIGT! Detta lås ska vara olåst när batteriet tas bort. Luftventiler Luftventilerna släpper in sval luft och släpper ut varm luft till den bärbara datorn.
Höger sida Kombiuttag för hörlursuttag och S/PDIF-uttag Denna port ger dig möjlighet att ansluta den bärbara datorn till förstärkta högtalare eller hörlurar. Du kan också använda denna port för att ansluta din bärbara dator till Sony/Philips Digital Interconnect Format (S/PDIF) kompatibla enheter. Mikronfoningång Mikrofoningången används för att ansluta den bärbara datorn till en extern mikrofon. USB 3.0-port med USB Charger+ Denna USB 3.0-port med -ikon kommer med funktionen USB Charger+.
HDMI-port Detta uttag är till för en High-Definition Multimedia Interfacekontakt (HDMI) och är HDCP-kompatibelt och tillåter uppspelning av HD DVD, Blu-ray och annat skyddat innehåll. LAN-port Sätt i nätverkssladden i denna port för att ansluta till ett lokalt nätverk (LAN). VGA-port Denna port låter dig ansluta din bärbara dator till en vanlig VGA-kompatibel enhet, såsom en monitor eller en projektor.
Vänstra sidan Kensington® säkerhetsöppning Kensington® säkerhetsöppning ger dig möjlighet att säkra din bärbara dator med Kensington®-kompatibla säkerhetsprodukter för bärbara datorer. USB 3.0-port Denna universalseriebussport 3.0 (USB 3.0) har en överföringshastighet på upp till 5 Gbit/s och är bakåtkompatibel till USB 2.0. Optisk enhet Den optiska enheten på din bärbara dator kan stödja olika diskformat, som CD-skivor, DVD-skivor, inspelningsbara skivor eller överskrivbara skivor.
Hål för manuell utmatning Hålet för manuell utmatning används för att mata ut brickan om den elektroniska utmatningsknappen inte fungerar. VARNING! Använd bara hålet för manuell utmatning när den elektroniska utmatningsknappen inte fungerar. OSB! För mer information, se kapitlet Använda den optiska enheten i manualen. Minneskortsläsare Denna bärbara dator har en inbyggd minneskortläsaröppning som stödjer MMC- och SD-kortformat.
Vy bakifrån Luftventiler Luftventilerna släpper in sval luft och släpper ut varm luft till den bärbara datorn.
Kapitel 2: Använda din bärbara dator E-manual för bärbar dator 25
Komma igång Installera batterierna (på valda modeller) OBS! Om inte batteriet är installerat på din bärbara dator, ska du följa dessa procedurer för installation. Sätt i batteripaketet i den vinkel som visas och tryck tills det klickar på plats.
Ladda din bärbara dator A. Anslut AC-strömsladden till AC-DC konvertern. B. Anslut strömadaptern till en 100V~240V strömkälla. C. Anslut strömadaptern till den bärbara datorns växelströmsingång. OBS! Information om strömadaptern: • Ingående spänning: 100–240 Vac • Ingångsfrekvens: 50-60 Hz • Märkning utgående ström: 230W (11.8A max.
VIKTIGT! • Finn input/output märkvärdet på din bärbara dator och försäkra dig om att den matchar input/output märkvärdet på din strömadapter. Visa bärbara datormodeller kan ha varierande märkvärden för utström beroende på den tillgängliga SKU:n. • Kontrollera att den bärbara datorn är ansluten till strömadaptern innan du sätter på den första gången. Vi rekommenderar starkt att du använder ett jordat vägguttag när du använder din bärbara dator i strömadapterläge.
Lyft för att öppna displaypanelen. Tryck på strömknappen.
Gester för styrplattan Gester ger dig möjlighet att starta program och öppna inställningarna för din bärbara dator. Se följande illustrationer när du använder handgester på styrplattan. Flytta pekaren Du kan trycka på eller klicka var som helst på styrplattan för att aktivera dess pekare och sedan glida med fingret på styrplattan för att flytta pekaren på skärmen.
Enfingerpekning Klicka/Dubbelklicka • • Klicka på ett program på s startskärm för att starta det. Dubbelklicka på en post i skrivbordsläget för att starta den. Vänsterklick Högerklicka • Klicka på ett program på startskärmen för att starta det. • • Dubbelklicka på ett program i skrivbordsläget för att starta det. Klicka på ett program på startskärmen för att välja det och köra inställningsfältet. Du kan även trycka på denna knapp för att starta fältet All Apps (Alla program).
Drag och släpp Dubbelklicka på en artikel, glid med samma finger av från styrplattan utan att lyfta det. Lyft fingret från styrplattan för att släppa posten på sin nya plats. Dra från överkanten • • 32 På s startskärm drar du från överkanten för att starta fältet All apps (Alla appar). Dra från överkanten för att visa menyn i ett pågående program. Dra i vänster kant Dra i höger kant Dra från vänster kant för att blanda apparna som körs. Dra från höger kant för att starta Charms bar.
Tvåfingerpekning Tryck Rotera Tryck med två fingrar på styrplattan för att simulera högerklick-funktionen. För att rotera en bild, placera två fingrar på styrplattan och vrid sedan ett finger medeller moturs medan den andra fingern är stilla. Tvåfingerbläddring (upp/ner) Tvåfingerbläddring (vänster/höger) Glid med två fingar för att bläddra upp eller ner. Glid med två fingar för att bläddra åt vänster eller höger. Zooma ut Zooma in För samman de två fingrarna på styrplattan.
Drag och släpp Välj en artikel samt håll vänster-klick-knappen intryckt. Glid nedåt på styrplattan med de andra fingrarna för att dra och släppa artikeln på en ny plats. Gester med två fingrar Svep upp Svep ner Svep tre fingrar uppåt för att visa Svep tre fingrar nedåt för att visa alla pågående program. skrivbordsläget.
Använda tangentbordet Funktionstangenter Funktionsknapparna på den bärbara datorns tangentbord kan utlösa följande kommandon: Placerar den bärbara datorn i sleep mode (viloläge) Stänger av slår på airplane mode (flygplansläge) OBS! När den är aktiverad avaktiverar airplane mode (flygplansläget) all trådlös anslutningsbarhet. Minskas tangentbordets ljusstyrka för bärbara datormodeller med bakgrundsbelyst tangentbord. Ökas tangentbordets ljusstyrka för bärbara datormodeller med bakgrundsbelyst tangentbord.
Slår på och stänger av högtalarna. Sänker högtalarvolymen. Höjer högtalarvolymen. Funktionsknappar för ASUS-program Den bärbara datorn levereras också med en specialuppsättning med funktionsknappar som kan användas för att starta ASUS-program. Växlar asus splendid video enhancement technology app för att växla mellan dessa förbättringslägen för skärmfärgen: Gamma Correction (Gammakorrigering), Vivid Mode (Livligt läge), Theater Mode (Teaterläge), Soft Mode (mjukt läge), My Profile (Min profil) och Normal.
Kontrollknappar för multimedia Kontrollknapparna för multimedia ger dig möjlighet att kontrollera multimediafiler, som t.ex. ljudfiler och videor, när de spelas på den bärbara datorn. Tryck på i kombination med pilknapparna, som på bilden nedan.
Använda den optiska enheten OBS! Den elektroniska utmatningsknappens verkliga placering på din bärbara dator kan variera beroende på vilken modell du har. Isättning av optisk skiva 1. Tryck på den elektroniska utmatningsknappen när den bärbara datorn är påslagen, för att delvis mata ut den optiska enhetens bricka. 2. Dra försiktigt ut brickan. VIKTIGT! Var noga med att inte vidröra linsen i den optiska enheten. Kontrollera att det inte finns några föremål som kan komma i kläm under drivenheten. 38 3.
5. Tryck försiktigt på brickan för att stänga den optiska enheten. OBS! Medan datan läses, är det normalt att man hör att det snurrar och vibrerar lite från den optiska enheten. Hål för manuell utmatning Hålet för manuell utmatning sitter på den optiska enhetens lucka och används för att mata ut brickan om den elektroniska utmatningsknappen inte skulle fungera. För att mata ut den optiska brickan manuellt, stick in ett gem som rätats ut i hålet för den manuella utmatningen, tills brickan öppnas.
E-manual för bärbar dator
Kapitel 3: Arbeta med Windows® 8 E-manual för bärbar dator 41
Starta första gången När du startar datorn första gången, uppträder flera skärmar för att vägleda dig genom konfigurationen av grundingställningarna i ditt Windows® 8-operativsystem. Starta din bärbara dator första gången: 1. Tryck på strömknappen på bärbara datorn. Vänta några minuter tills installationsskrärmen visas. 2. På installationsskärmen väljer du vilket språk din bärbara dator ska använda. 3. Läsa noga igenom licensvillkoren.
Windows® UI Windows® 8 levereras med ett titelbaserat användargränssnitt (user interface/UI) vilken låter dig organisera och enkelt komma åt Windows® appar från startskärmen. Det inkluderar också följande funktioner som du kan använda när du arbetar med din bärbara dator. Startskärm Startskärmen visas efter lyckosam inloggning till ditt användarkonto. Den hjälper till att organisera alla programmen och applikatopnerna du behöver på en enda plats.
Surfzoner Surfzoner på skärmen låter dig starta program och komma åt inställningarna för din bärbara dator. Funktionerna hos dessa surfzoner kan aktiveras med styrplattan.
Surfzon Åtgärd övre vänstra hörnet Låt muspekaren sväva över det övre vänstra hörnet och tryck sedan på det senaste programmets miniatyr för att återgå till programmet som körs. nedre vänstra hörnet Om du startade fler än en app, glid ned för att visa alla startade appar. Från skärmen till ett program som körs: Sväva med muspekaren på det nedre vänstra hörnet och tryck därefter på startskärmens miniatyr för att gå tillbaka till startskärmen.
Arbeta med Windows® appar Använd den bärbara datorns styrplatta eller tangentbord för att starta och anpassa dina appar. Starta appar Placera muspekaren över appen och vänsterklicka eller tryck en gång för att starta den. Tryck på -knappen två gånger och använd pilknapparna för att bläddra genom programmen. Tryck på för att starta ett program.
Stänga appar 1. Flytta muspekaren till ovansidan av den startade appen och vänta sedan att pekaren ändras till en handikon. 2. Dra sedan och släpp appen nederst på skärmen för att stänga den. Från den starta appens skärm trycker du på E-manual för bärbar dator .
Öppna programskärmen Utöver programmen som redan fästs på startskärmen, kan du även öppna andra applikationer genom programskärmen. Horisontellt rullningsfält Starta programskärmen Starta programskärmen genom att använda den bärbara datorns styrplatta eller tangentbord. Svep från överkanten för att starta fältet All Apps (Alla program). Från startskärmen trycker du på för att välja ikonen All Apps (Alla program) och tryck därefter på 48 .
Fästa fler program på startskärmen Du kan fästa fler program på startskärmen med hjälp av styrplattan. 1. Placera muspekaren över den app som du vill lägga till på startskärmen. 2. Högerklicka på appen för att aktivera dess inställningar. 3. Tryck på E-manual för bärbar dator ikonen.
Charms bar Charms bar är ett verktygsfält som kan triggas på höger sida av skärmen. Det består av flera verktyg som låter dig dela program och ge snabbåtkomst för anpassning av inställningarna på din bärbara dator. Charms bar Starta Charms bar OBS! När den anropas visas Charms bar först som en uppsättning med vita ikoner. Bilden ovan visar hur Charms bar ser ut när den är aktiverad. Använd den bärbara datorns styrplatta eller tangentbord för att starta Charms bar.
Inuti Charms bar Search (Sök) Detta verktyg låter dig leta efter filer eller program på din bärbara dator. Share (Dela) Detta verktyg låter dig dela program via sociala nätverksplatser eller via e-post. Start Detta verktyg återför visningen till startskärmen. Från startskärmen kan du också använda detta för att återgå till en tidigare öppnad app. Devices (Enheter) Detta verktyg låter dig få åtkomst till och dela filer med enheter anslutna till din bärbara dator såsom extern skärm eller skrivare.
Snap-funktion Snap-funktionen visar två appar sida-vid-sida vilket gör att du kan arbetta eller växla mellan appar. VIKTIGT! Kontrollera att skärmen på den bärbara datorn är inställd på 1366 x 768 pixlar eller mer innan du använder fästfunktionen. Snap-fältet Använda snap Använd den bärbara datorns styrplatta eller tangentbord för att aktivera och använda Fäst. 52 1. Starta den app du önskar använda snap-funktionen på. 2. Svep med muspekare på ovansidan av skärmen. 3.
1. Starta den app du önskar använda snap-funktionen på. 2. Tryck på 3. Starta en annan app. 4. För att växla mellan appar tryck på� E-manual för bärbar dator . .
Andra tangentbordsgenvägar Vid användning av tangentbordet kan du också använda följande genvägar som hjälp för att starta applikationer och navigera Windows®8. \ Växlar mellan startskärmen och senast körd app Startar skrivbordet Startar Datorfönstret i skrivbordsläge Öppnar filsökningsfönstret Öppnar delningsfönstret Öppnar inställningsfönstret Öppnar enhetsfönstret Aktiverar låsskärmen Minimerar det aktiva fönstret 54 E-manual för bärbar dator
Öppnar det andra skärmfönstret Öppnar appsökningsfönstret Öppnar fönstret Kör Öppnar Ease of Access Center Öppnar inställningssökfönstret Öppnar menyrutan för Windows verktyg Startar förstoringsikonen och zoomar in på skärmen Zoomar ut på skärmen Öppnar berättarinställningarna E-manual för bärbar dator 55
Anslutning till trådlösa nätverk Wi-Fi-anslutning Åtkomst till e-post, surfa på Internet och dela program via sociala nätverksplatser med din bärbara dators Wi-Fi-anslutning. VIKTIGT! Se till att Airplane mode (Flygplansläge) är avstängt för att starta Wi-Fi-funktionen på den bärbara datorn. För mer information, se kaptilet Flygplansläge i manualen.ç Aktiverar Wi-Fi Aktivera Wi-Fi i din bärbara dator genom följande steg: 56 1. Starta Charms bar. 2. Tryck på 3.
4. Tryck på Connect (Anslut) för att starta nätverksanslutningen. OBS! Du kan uppmanas att ange en säkerhetsnyckel för att aktivera Wi-Fi-anslutningen. 5. Om du vill aktivera delning mellan din bärbara dator och andra trådlösa system, tryck på Yes, turn on sharing and connect to devices (Sätt på delning och anslut till enheterna). Tryck på No, don't turn on sharing or connect to devices (Sätt inte på delning eller anslut till enheter) om du inte vill aktivera delningsfunktionen.
Bluetooth Använd Bluetooth för att underlätta överföring av trådlösa data med andra Bluetooth-aktiverade enheter. VIKTIGT! Se till att Airplane mode (Flygplansläge) är avstängt för att starta Wi-Fi-funktionen på den bärbara datorn. För mer information, se kaptilet Flygplansläge i manualen. Länkning med andra Bluetooth-aktiverade enheter. Du måste länka din bärbara dator till anda Bluetooth-aktiverade enheter för att kunna göra dataöverföringar. Det gör du genom att använda styrtplattan på följande sätt: 1.
4. Välj en enhet i listan. Jämför lösenordet på din bärbara dator med löseordet som skickats till den enhet du valt. Om de är identiska, tryck på Yes (Ja) för att länka den bärbara datorn till enheten. OBS! För vissa Bluetooth-aktiverade enheter kan du bli uppmanad att ange lösenordet på din bärbara dator.
Flygplansläge Airplane mode (Flygplansläge) avaktiverar trådlös kommunikation och ger dig möjlighet att använda den bärbara datorn säkert under flygning. Sätta på flygplansläget 1. Starta Charms bar. 2. Tryck på 3. Flytta skjutreglaget åt höger för att sätta på flygplansläget. Tryck på och på . . Stänga av flygplansläget 1. Starta Charms bar. 2. Tryck på 3. Flytta skjutreglaget åt vänster för att stänga av flygplansläget. Tryck på och på . .
Anslutning till trådbundna nätverk Du kan även ansluta till trådbundna nätverk, t.ex. lokala nätverk och bredband med datorns LAN-port. OBS! Kontakta din Internettjänstleverantör (ISP) för information eller din nätverksadministratör för hjälp med att installera din Internetanslutning. Se följande procedurer för att konfigurera dina inställningar. VIKTIGT! Kontrollera att en nätverkskabel är ansluten mellan den bärbvara datorns LAN-port och ett lokalt nätverk innan du vidtar följande åtgärder.
5. Tryck på Internet Protocol Version 4 (TCP/IPv4) (Internetprotokollversion 4(TCP/IPv4)) och tryck på Properties (Egenskaper). 6. Välj Obtain an IP address automatically (Erhåll en IP-adress automatiskt) och klicka på OK. OBS! Fortsätt till nästa steg om du använder PPPoE-anslutning.
7. Återgå till fönstret Network and Sharing Center (Nätverks- och delningscenter) och tryck på Set up a new connection or network (Installera en nätverksanslutning eller nätverk). 8. Välj Connect to the Internet (Anslut till Internet) och klicka på Next (Nästa).
9. Tryck på Broadband (PPPoE) (Bredband (PPPoE)). 10. Ange användarnamn, lösenord och anslutningens namn och tryck på Connect (Anslut). 11. Tryck på Close (Stäng) för att avsluta konfigurationen. 12. Tryck på på verktygsfältet och tryck därefter på anslutningen du just skapat. 13. Ange ditt användarnamn och lösenord och tryck på Connect (Anslut) för att ansluta till Internet.
Konfigurera en statisk IP-adressanslutning: 1. Upprepa steg 1 till 5 under Connecting to a dynamic IP/PPPoE network connection (Ansluta till ett dynamiskt IP/PPPoE nätverk). 2 Välj Use the following IP address (Använd följande IP-adress). 3. Ange IP-adressen, nätmask och standard-gateway från din iInternetleverantör. 4. Vid behov kan du även ange önskad DNS-serveradress och alternativ DNS-serveradress och trycka på OK.
Stänga av den bärbara pekdatorn Du kan stänga av den bärbara datorn genom att göra något av följande: • Tryck på från Charms bar (Amulett)-listan och tryck på > Shut down (Stäng av) för att stänga av normalt. • Från inloggningsskärmen tryck på > Shut down (Stäng av). • Du kan alltså stänga av din bärbara datorn med skrivbordsläget. För att göra detta, starta skrivbordet och tryck på alt + f4 för att öppna avstängningsfönstret. Välj Shut Down (Stäng av) från rullgardinsmenyn och klicka sedan på OK.
Kapitel 4: Power-on-självtestet.
Power-on-självtestet.(POST) Power-on-självtestet (POST) är en rad programvarukontrollerade diagnostiska test som kör när du sätter på eller startar om den bärbara datorn. Programvaran som kontrollerar POST är installerad som en permanent del av den bärbara datorns arkitektur. Använda POST för att öppna BIOS och felsöka Under POST kan du öppna BIOS-inställningarna eller köra felsökningsalternativ med funktionsknapparna på den bärbara datorn. Se följande information för mer detaljer.
BIOS-inställningar OBS! BIOS-skärmbilderna i denna sektion är endast till som referens. De verkliga skärmbilderna kan variera med modell och territorium. Systemstart Denna meny ger dig möjlighet att ställa in dina systemstartsprioriteringar. Se följande procedurer när du ställer in din systemstartsprioritering. 1. På Boot (start) skärmen välj Boot Option (startalternativ) #1. Main Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
2. Tryck på Main och välj en enhet som Boot Option #1. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Advance Boot Security Save & Exit Boot Configuration Launch CSM Launch PXE OpROM [Enabled] [Disabled] Sets the system boot order Driver Option Priorities Boot Boot Boot Boot Option Option Option Option Priorities #1 #2 #3 [Windows Boot Manager] [P1: Hitachi HTS547..
Säkerhet Denna meny ger dig möjlighet att ställa in lösenord för administratör och användare av din bärbara dator. Det ger också möjlighet att kontrollera åtkomsten till din bärbara dators hårddiskenhet, gränssnitt för indata/utdata (I/O) och USB. OBS! Main • Om du installerar ett User Password (Användarlösenord), blir du uppmanad att ange detta innan du öppnar den bärbara datorns operativsystem.
För att rensa lösenordet: 1. På Security (säkerhets-) skärmen välj Setup Administrator Password (inställning administratörslösenord) eller User Password (användarlösenord). 2. Ange nuvarande lösenord och tryck på 3. Lämna fältet Create New Password (skapa nytt lösenord) tomt och tryck på 4. . . Välj Yes (Ja) i bekräftelserutan och tryck på .
USB gränssnittssäkerhet Via menyn I/O Interface Security-menyn (Gränssnittssäkerhet för I/O) kan du även öppna USB Interface Security (Gränssnittssäkerhet för USB) för att låsa eller låsa upp portar och enheter. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Ställ in huvudlösenord I menyn Security (Säkerhet) kan du använda Set Master Password (Ställ in huvudlösenord) för att installera en lösenordsaktiverad åtkomst till hårddiskenheten. Main Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advance Boot Security Save & Exit Password Description If ONLY the Administrator’s password is set,then this only limits access to Setup and is only asked for when entering Setup.
Spara och Avsluta För att spara konfigurationsinställningarna väljer du Save Changes and Exit (Spara ändringar och avsluta) innan du avslutar BIOS. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Main Advance Boot Security Save & Exit Save Changes and Exit Exit system setup after saving the changes.
Main Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Felsökning Genom att trycka på under POST kan du öppna felsökningsalternativen i Windows® 8, vilka innehåller följande: • Uppdatera datorn • Återställ datorn • Avancerade alternativ Refresh your PC (Uppdatera datorn) Använd Refresh your PC (Uppdatera datorn) om du vill uppdatera systemet utan att förlora dina aktuella filer och applikationer. Öppna funktionen under POST: 1. Starta om den bärbara datorn och tryck på 2. under POST.
Återställ datorn VIKTIGT! Säkerhetskopiera alla dina data innan detta alternativ utförs. Använd Reset your PC (Återställ datorn) för att återställa den bärbara datorn till fabriksinställningarna. Öppna funktionen under POST: 1. Starta om den bärbara datorn och tryck på 2. under POST. Vänta tills Windows® har laddat skärmen Choose an option (Välj ett alternativ) och tryck på Troubleshoot (Felsök). 3. Tryck på Reset your PC (Återställ datorn). 4.
Advanced options (Avancerade alternativ) Använd Advanced options (Avancerade alternativ) för att utföra fler felsökningsalternativ på den bärbara datorn. Öppna funktionen under POST: 1. Starta om den bärbara datorn och tryck på 2. under POST. Vänta tills Windows® har laddat skärmen Choose an option (Välj ett alternativ) och tryck på Troubleshoot (Felsök). 3. Tryck på Advanced options (Avancerade alternativ). 4.
4. På skärmen Advanced options (Avancerade alternativ) väljer du System Image Recovery (Återställning av systemavbildning). 5. Välj ett konto som du vill återställa med hjälp av en systemavbildningsfil. 6. Ange kontots lösenord och tryck på Continue (Fortsätt). 7. Välj Use the latest available system image (Använd den senaste systemavbildningsfilen) (rekommenderas), och tryck på Next (Nästa).
Kapitel 5: Uppgradera din bärbara dator E-manual för bärbar dator 81
Installera en Random Access Memory- (RAM) modul Uppgradera minneskapaciteten på din bärbara dator genom att installera en RAM-modul i minnesmodulfacket. Följande två steg visar hur du installerar en RAM-modul i din bärbara dator. VARNING! Koppla ifrån all extern kringutrustning, telefoneller telekommunikationsledningar och elkontakt (t.ex. extern strömförsörjning, batteri etc.) innan locket till hårddisken tas bort.
A. Dra ut gummihöljet på den bärbara datorns undersida. B. Lossa skruven på höljet. C. Dra ut höljet över facket och ta av det helt från den bärbara datorn.
D. Rikta in och sätt i RAM-modulen i RAM-modulöppningen.
F. Passa ihop och tryck ner fackets lock på sin plats igen. G. Sätt tillbaka och dra åt skruvarna som du tog bort tidigare. H. Fäst gummihöljet över facket igen.
Byte av hårddisken (HDD) Se följande steg om du måste byta hårddiskenhet på den bärbara datorn. VIKTIGT! Köp endast en HD från återförsäljare av denna bärbara dator för att garantera maximal kompatibilitet och tillförlitlighet. Du bör byta HDD:n med hjälp av en professionel person. Du kan också uppsöka ett auktoriserat servicecenter för mer hjälp. VARNING! Koppla ifrån all extern kringutrustning, telefoneller telekommunikationsledningar och elkontakt (t.ex. extern strömförsörjning, batteri etc.
A. Dra ut gummihöljet på den bärbara datorns undersida. B. Lossa skruven på höljet. C. Dra ut höljet över facket och ta av det helt från den bärbara datorn.
D. Ta bort skruvarna som håller HD-vaggan i facket. E. Lossa HDD-vaggan från HDD-porten och ta sedan bort HDDvaggan från facket. 1 HD-vagga F. Vänd HDD-vaggan upp och ned och ta bort skruvarna. G. Ta bort den gamla HDD:n från HDD-vaggan.
H. Sätt i den nya HDD:n med PCB:n (tryckt kretskort) vänd mot HDD-vaggan. Se till att uttagen på hårdisken inte hindras av någon dela av HD-vaggan. I. Sätt tillbaka och dra åt skruvarna som du tog bort tidigare.
J. Sätt tillbaka HDD-vaggan i facket, med HDD-kontaktan mitt för den bärbara datorns HDD-port. Tryck på HDD-vaggan tills den ansluter till den bärbara datorn. K. Fäst HDD-vaggan med skruvarna du tog bort tidigre.
L. Passa ihop och tryck ner fackets lock på sin plats igen. M. Sätt tillbaka och dra åt skruvarna som du tog bort tidigare. N. Fäst gummihöljet över facket igen.
Installera ett nytt batteripaket VARNING! Stäng av den bärbara datorn och koppla ifrån all kringutrustning, alla telefon- och telekommunikationsledningar och strömkontakter innan batteripaketet tas bort. VIKTIGT! Köp endast batteripaket från återförsäljare av denna bärbara dator för att garantera maximal kompatibilitet och tillförlitlighet. NOTERA: Följande steg är också tillämpliga för borttagning och byte av batteripaketet på den bärbara datorn.
C. Rikta in det nya batteripaketet i den bärbara datorns batteriöppning.
E-manual för bärbar dator
Tips och vanliga frågor E-manual för bärbar dator 95
Praktiska tips för din bärbara dator För att hjälpa dig att maximera användningen av din dator, ska du underhålla systemets prestanda och kontrollera att alla dina data är säkra. Här följer några praktiska tips som du kan följa: 96 • Uppdatera regelbundet Windows® för att säkerställa att dina applikationer har de senaste säkerhetsinställningarna. • Använd ASUS Live Update för att uppdatera ASUS-exklusiva applikationer, drivrutiner och hjälpfunktioner på den bärbara datorn.
Vanliga frågor om hårdvara 1. En svart prick, eller ibland en färgad prick, uppträcder på skärmen när jag sätter på datorn. Vad ska jag göra? Trots att prickarna normalt uppträder på skärmen, påverkar de inte systemet. Om incidenten fortsätter och efterhand påverkar systemets prestanda, kontakta ett godkänt ASUS servicecenter. 2. Min skärmbild har ojämn färg och ljusstyrka. Hur kan jag åtgärda det? Färgen och ljusstyrkan på skärmbilden kan påverkas av vinkeln och datorns placering.
4. 5. 6. 7. LED-indikatorn för mitt batteri tänds inte. Vad är fel? • Kontrollera om strömadaptern eller batteriet sitter riktigt. Du kan även ta bort strömadaptern eller batteriet, vänta någon minut och sedan sätta i dem igen i datorn och strölmuttaget. • Om problemet kvarstår, kontakta ditt lokala ASUS servicecenter för hjälp. Varför fungerar inte min styrplatta? • Tryck på för att aktivera styrplattan.
8. Varför fortsätter ljud att komma ut från den bärbara datorns högtalare fast jag redan anslutit mina hörlurar till rätt uttag? Gå till Control Panel (Kontrollpanel) > Hardware and Sound (Hårdvara och ljud) och öppna Audio Manager (Ljudhanterare) för att konfigurera inställningarna. 9. Min bärbara dator utför inte tangenttryckningarna riktigt eftersom markören rör sig hela tiden. Vad ska jag göra? Kontrollera att inget oavsiktligt rör vid eller trycker på styrplattan när du skriver på tangentbordet.
Vanliga frågor om programvara 1. 2. 3. 100 När jag stänger av datorn tänds strömindikatorn men inte enhetens aktivitetsindikator. Systemstart görs inte heller. Hur kan jag åtgärda det? Du kan prova att göra något av följande: • Framtvinga avstängning av datorn genom att trycka på strömbrytaren i minst fyra (4) sekunder. Kontrollera om strömadaptern och batteriet är riktigt isatta och sätt på datorn. • Om problemet kvarstår, kontakta ditt lokala ASUS servicecenter för hjälp.
4. Min dator startar inte om. Hur kan jag åtgärda det? Du kan prova att göra något av följande: 5. • Ta bort alla anslutna enheter från datorn och starta om systemet. • Tryck på F9 när du startar. När datorn öppnar Troubleshooting (Felsökning), tryck på Refresh (Uppdatera) eller Reset your PC (Återställ din dator). • Om problemet kvarstår, kontakta ditt lokala ASUS servicecenter för hjälp.
6. Hur kan jag starta till DOS med min USB-enhet eller ODD? Se följande steg: a. Starta om datorn och öppna BIOS genom att trycka på F2 på tangentbordet. b. Gå till Boot (Start) > Launch CSM (Starta CSM) > Enabled (Aktiverad). c. Gå till menyn Security (Säkerhet) och ställ in Secure Boot Control (Säker startkontroll) på Disabled (Avaktiverad). d. Tryck på F10 för att spara ändringarna och stäng BIOS. e. Håll ESC (Retur) nedtryckt för att starta menyn för omstart när datorn startas om.
Bilagor E-manual för bärbar dator 103
DVD-ROM enhetsinformation (på utvalda modeller) DVD-enheten låter dig visa och skapa dina egna CD-skivor och DVDskivor. Du kan köpa ett tillvalt DVD-visarprogram för att visa DVDtitlar. Regional uppspelningsinformation Uppspelning av DVD-filmer innebär dekodning av MPEG2 video, digital AC3 audio och avkryptering av CSS- skyddat innehåll. CSS (ibland kallat copy guard) är namnet som givits till innehållsskyddet som anammats av filmindustrin för att tillgodose behovet att skydda sig mot kopiering.
Regionsdefinitioner Region 1 Canada, USA, nordamerikanska territorierna Region 2 Tjeckien, Egypten, Finland, Frankrike, Tyskland, Golfstaterna, Ungern, Island, Iran, Irak, Irland, Italien, Japan, Nederländerna, Norge, Polen, Portugal, Saudiarabien, Skottland, Sydafrika, Spanien, Sverige, Schwiez, Syrien, Tukiet, Storbritannien, Grekland, föredetta Jugoslaviska republikerna, Slovakien Region 3 Burma, Indonesien, Sydkorea, Malaysia, Filippinerna, Singapore, Taiwan, Thailand, Vietnam Region 4 Australien, Karib
Blu-ray ROM enhetsinformation (på utvalda modeller) Blu-ray-enheten låter dig visa högdefinitionsvideos (HD) och andra skivfilformat såsom DVD och CD. Definition av regioner Region A Nordamerika, Central- och Sydamerikas länder och deras territorium; Taiwan, Hongkong, Macao, Japan, Korea (Syd och Nord), sydöstra Asiens länder och deras territorium. Region B Europa, Afrika och sydvästra Asiens länder och deras territorium, Australien och Nya Zeeland.
Interna modem uppfyllelse Den bärbara datorn med interna modem överensstämmer med JATE (Japan), FCC (USA, Kanada, Korea, Taiwan) och CTR21. Det interna modemet har godkänts i enlighet med rådsbeslut 98/482/ EC för paneuropeisk enskild terminalanslutning till det publika telefonnätet (PSTN). Emellertid på grund av olikheter mellan de enskilda PSTN i de olika länderna ger inte godkännandet själv en ovillkorlig försäkran om fungerande drift på varje PSTN nätverks anslutningspunkt.
Network Compatibility Declaration (deklaration om nätverkskompatibilitet) Uttalande som ska göras av tillverkaren till användaren: "Denna deklaration indikerar de nätverk med vilka utrustningen är konstruerad att arbeta och alla rapporterade nätverk med vilka utrustningen har samverkansproblem. Tillverkaren ska också associera ett uttalande för att klargöra där nätverkskompatibilitet är beroende på fysiska och programbytesinställningar.
Denna tabell visar de länder som för närvarande är under CTR21 standard.
Denna information har kopierats från CETECOM och lämnas utan förpliktelse. För uppdatering av denna tabell besök http://www. cetecom.de/technologies/ctr_21.html 1 Nationella krav gäller endast om utrustningen använder telefoni med pulsval (tillverkare kan hävda i bruksanvisningen att utrustningen endast är avsedd att stödja DTMF signalering, vilket skulle göra ytterligare tester överflödiga). I Nederländerna krävs ytterligare tester för serieanslutning och nummerpresentationsfunktioner.
• Rikta om eller flytta på mottagarantennen. • Öka avståndet mellan utrustningen och mottagaren. • Anslut utrustningen till ett uttag på en annan strömkrets än den som mottagaren är ansluten till. • Rådfråga försäljaren eller en erfaren radio/TV-tekniker. VARNING! Användningen av en skyddad elsladd krävs för att kunna tillmötesgå FCCnämndens gränser och för att förhindra störning på radio- och TV-mottagning i närheten. Det är viktigt att endast den medföljande elsladden används.
FCC (Amerikanska telekommunikationsmyndighetens) varningstext om radiofrekvens- (RF-) exponering VARNING! Varningstext från FCC: Ändringar eller modifieringar som inte uttryckligen godkänts av den part, som är ansvarig för uppfyllandet av villkoren, kan upphäva användarens rätt att använda utrustningen. “Tillverkaren deklarerar att denna enhet är begränsad till kanalerna 1 till 11 i 2.4 GHz-frekvensbandet via specificerade inbyggda program kontrollerade i USA.
CE Märkning CE märkning för enheter utan trådlös LAN/Bluetooth Den levererade versionen av denna enhet uppfyller kraven hos EEC direktiven 2004/108/EG ”Elektromagnetisk kompatibilitet” och 2006/95/EC ”Lågspänningsdirektivet”.
IC:s strålningsexponeringsdeklaration för Kanada Denna utrustning uppfyller IC:s strålningsgränsvärden som fastställts för en okontrollerad miljö. För fortsatt uppfyllande av IC RF-exponeringskrav ska direktkontakt med sändarantennen under sändning undvikas. Slutanvändare måste följa de specifika driftsinstruktionerna för tillfredsställande uppfyllelse av radiostrålningskraven.
Trådlös hanteringskanal för olika områden Nordamerika 2.412-2.462 GHz Ch01 genom CH11 Japan 2.412-2.484 GHz Ch01 genom Ch14 Europa ETSI 2.412-2.472 GHz Ch01 genom Ch13 Frankrike begränsade trådlösa frekvensband En del områden i Frankrike har begränsade frekvensband. Det värsta fallet av max tillåten ström inomhus är: • 10mW för hela 2.4 GHzbandet (2400 MHz–2483.5 MHz) • 100mW för frekvenser mellan 2446.5 MHz och 2483.5 MHz OBS! Kanalerna 10 till 13 inbegripet verkar i bandet 2446.
Avdelningar inom vilka användning av 2400–2483.
UL säkerhetsanmärkningar För att motsvara UL 1459 krävs telekommunikationer (telefon)-utrustning som avses att anslutas elektriskt till ett telekommunikationsnätverk, med en jordad funktionsspänning som inte överskrider mer än 200V, 300V topp-till-topp och 105V rms, och som installeras eller används i överensstämmelse med National Electric Code (NFPA 70).
Krav strömsäkerhet Produkter med elektrisk ström med värden på upp till 6A och som är tyngre än 3Kg måste använda godkända elsladdar som är större än eller lika med: H05VV-F, 3G, 0.75mm2 eller H05VV-F, 2G, 0.75mm2. TV-mottagarmeddelanden Notering till CATV Systeminstallerare - Kabeldistributionssystemet bör vara jordat i enlighet med ANSI/NFPA 70, National Electrical Code (NEC), särskilt avsnitt 820.
VORSICHT! Explosionsgefahr bei unsachgemäßen Austausch der Batterie. Ersatz nur durch denselben oder einem vom Hersteller empfohlenem ähnlichen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. (German) ADVARSELI! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. (Danish) VARNING! Explosionsfara vid felaktigt batteribyte.
Säkerhetsinformation optisk lagringsenhet Säkerhetsinformation laser CD-ROM användarsäkerhet CLASS 1 LASER PRODUKT VARNING! För att förhindra exponering av den optiska enhetens laser, försök inte ta isär eller reparera den optiska disken på egen hand. För din egna säkerhets skull, kontakta en professionell tekniker för hjälp. Varningsetikett service VARNING! OSYNLIG LASERSTRÅLNING NÄR DEN ÄR ÖPPEN. TITTA INTE IN I STRÅLEN ELLER DIREKT PÅ MED OPTISKA INSTRUMENT.
CTR 21 godkännande (för bärbara datorer med inbyggt modem) Danish Dutch English Finnish French German Greek Italian Portuguese E-manual för bärbar dator 121
Spanish Swedish ENERGY STAR-efterlevande produkt ENERGY STAR är ett samarbetsprogram mellan amerikanska EPA (Environmental Protection Agency) och amerikanska energidepartementet för att hjälpa oss alla att spara pengar och skydda miljön genom energieffektiva produkter och metoder. knapp på tangentbordet.Alla ASUS-produkter som är märkta med ENERGY STAR-logotypen efterlever ENERGY STARstandarden, och funktionen för strömhantering är aktiverad som standard.
EU:s eko-märkning Denna bärbara dator har fått märkningen EU Flower, vilket betyder att denna produkt har följande egenskaper: 1. Minskad energiförbrukning under användning och standbylägen 2. Begränsad användning av giftiga tungmetaller 3. Begränsad användning av ämnen som är farliga för miljö och människors hälsa 4. Minskning av användningen av naturresurser genom främjande av återvinning* 5.
Uppfyllelse och deklaration av globala miljöbestämmelser ASUS följer det gröna konstruktionskonceptet för konstruktion och tillverkning av våra produkter och ser till att varje steg i produktens livscykel för en ASUS produkt är i linje med globala miljöbestämmelser. Dessutom redovisar ASUS relevant information baserat på reglerande krav. Se http://csr.asus.com/english/Compliance.
EC Declaration of Conformity We, the undersigned, Manufacturer: ASUSTeK COMPUTER INC. Address, City: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR. 21-23, 40880 RATINGEN Country: GERMANY declare the following apparatus: Product name : Notebook P.C.
E-manual för bärbar dator