User's Manual

Connecting Windows® devices
1. Connect the bundled power adapter to your ROG GR8.
2. Press the Miracast Receiver button.
NOTE: The LED on the Miracast Receiver button lights up and turns to
red to indicate that the Miracast Receiver function is enabled.
3. Add your device.
- For Windows® 8.1 /Windows® 8.1 PRO, call out the Charms bar
then select Devices > Project > Add a wireless display. From
the Add a wireless display screen, click Add a device.
4. Key-in the WPS PIN shown on ROG GR8 to start screencasting
from your Windows® device to the ROG GR8.
- For Windows® 10, go to Start > Settings > Devices >
Connected devices > Add devices.