User’s Manual
Table Of Contents
- 华硕产品质量保证卡
- 第一章:产品介绍
- 第二章:硬件设备信息
- 第三章:BIOS 程序设置
- 3.1 认识 BIOS 程序
- 3.2 BIOS 设置程序
- 3.3 我的最爱(My Favorites)
- 3.4 主菜单(Main Menu)
- 3.5 Extreme Tweaker 菜单(Extreme Tweaker menu)
- 3.6 高级菜单(Advanced menu)
- 3.6.1 平台各项设置(Platform Misc Configuration)
- 3.6.2 处理器设置(CPU Configuration)
- 3.6.3 系统代理设置(System Agent Configuration)
- 3.6.4 PCH 设置(PCH Configuration)
- 3.6.5 PCH 存储设备设置(PCH Storage Configuration)
- 3.6.6 PCH-FW 设置 (PCH-FW Configuration)
- 3.6.7 Thunderbolt(TM) 设置(Thunderbolt(TM) Configuration)
- 3.6.8 内置设备设置(OnBoard Devices Configuration)
- 3.6.9 高级电源管理设置(APM Configuration)
- 3.6.10 PCI 子系统设置
- 3.6.11 USB 设备设置(USB Configuration)
- 3.6.12 网络协定堆栈设置(Network Stack Configuration)
- 3.6.13 NVMe 设置 (NVMe Configuration)
- 3.6.14 HDD/SSD SMART Information
- 3.7 监控菜单(Monitor menu)
- 3.8 启动菜单(Boot menu)
- 3.9 工具菜单(Tools menu)
- 3.10 退出 BIOS 程序(Exit menu)
- 3.11 更新 BIOS 程序
- 第四章:RAID 支持
- 附录
A-4
附錄
ACPI/ASL 檢查表
Q-Code 列表
Code 說明
B4 USB hot plug
B5 PCI bus hot plug
B6 Clean-up of NVRAM
B7 Configuration Reset (reset of NVRAM settings)
B8– BF Reserved for future AMI codes
D0 CPU initialization error
D1 System Agent initialization error
D2 PCH initialization error
D3 Some of the Architectural Protocols are not available
D4 PCI resource allocation error. Out of Resources
D5 No Space for Legacy Option ROM
D6 No Console Output Devices are found
D7 No Console Input Devices are found
D8 Invalid password
D9 Error loading Boot Option (LoadImage returned error)
DA Boot Option is failed (StartImage returned error)
DB Flash update is failed
DC Reset protocol is not available
Code 說明
0x01 System is entering S1 sleep state
0x02 System is entering S2 sleep state
0x03 System is entering S3 sleep state
0x04 System is entering S4 sleep state
0x05 System is entering S5 sleep state
0x10 System is waking up from the S1 sleep state
0x20 System is waking up from the S2 sleep state
0x30 System is waking up from the S3 sleep state
0x40 System is waking up from the S4 sleep state
0xAC System has transitioned into ACPI mode. Interrupt controller is in PIC mode.
0xAA System has transitioned into ACPI mode. Interrupt controller is in APIC mode.