User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Extreme Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 NVMe Configuration
- 6.12 Onboard Devices Configuration
- 6.13 APM Configuration
- 6.14 HDD/SSD SMART Information
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
ROG MAXIMUS XII FORMULA BIOS Manual
55
Connectivity mode (Wi-Fi & Bluetooth)
This item allows you to enable or disable Wi-Fi and Bluetooth connectivity module.
Configuration options: [Disabled] [Enabled]
LED lighting
When system is in working state
This item allows you to turn the RGB LED lighting on or off when the system is in the
working state.
[All On]: RGB LEDs and Functional LEDs will behave normally.
[Stealth Mode]: All LEDs will be disabled.
[Aura Only]: RGB LEDs will light up, while all functional LEDs will be
disabled.
[Aura Off]: Functional LEDs behave normally, while RGB LEDs will be
disabled.
The RGB Header(s) and Addressable Header(s) will only work under the S0 (working)
state.
Q-Code LED Function
[Disabled] Disable the Q-Code LED.
[POST Code Only] Show POST (Power-On Self-Test) code on Q-Code LED.
[Auto] Automatically display POST (Power-On Self-Test) code and
CPU temperature on Q-Code LED.
When system is in sleep, hibernate or soft off states
This item allows you to turn the RGB LED lighting on or off when the system is in the
sleep, hibernate or soft off states.
[All On]: RGB LEDs and Functional LEDs will behave normally.
[Stealth Mode]: All LEDs will be disabled.
[Aura Only]: RGB LEDs will light up, while all functional LEDs will be
disabled.
[Aura Off]: Functional LEDs behave normally, while RGB LEDs will be
disabled.
The RGB Header(s) and Addressable Header(s) will only work under the S0 (working)
state.
M.2_1 Configuration
[Auto] Auto-detects the M.2 device and PCIE device. If only M.2 device on M.2_1
slot, M.2 PCIE device will be X4 mode or SATA mode. If a PCIE device is
detected on PCIEX1 slot, M.2 will be X2 mode or SATA mode (when M.2
runs SATA mode, SATA6G_2 will be disabled).
[PCIE] Only supports M.2 PCIE device and X4 mode.
When M.2_1 is populated by an Intel Optane Memory H10, M.2_1 will be set to [Auto].