User Manual

ROG MAXIMUS XII FORMULA BIOS Manual
65
AIO PUMP Control
[Disabled] Disable the AIO PUMP control feature.
[Auto] Detects the type of AIO PUMP installed and automatically
switches the control modes.
[DC mode] Enable the AIO PUMP control in DC mode for 3-pin chassis fan.
[PWM mode] Enable the water AIO PUMP control in PWM mode for 4-pin
chassis fan.
The following items appear only when AIO PUMP Control is set to [Auto], [DC mode], or
[PWM mode].
AIO PUMP Q-Fan Source
The assigned fan will be controlled according to the selected temperature
source.
Configuration options: [CPU] [MotherBoard] [Chipset] [T_Sensor] [Multiple
Sources]
For Multiple Sources, select up to three temperature sources and the fan will automatically
change based on the highest temperature.
AIO PUMP Upper Temperature
Use the <+> or <-> keys to adjust the upper limit of the AIO PUMP
temperature.
AIO PUMP Max. Duty Cycle (%)
Use the <+> or <-> keys to adjust the maximum AIO PUMP duty cycle.
When the CPU temperature reaches the upper limit, the AIO PUMP will
operate at the maximum duty cycle.
AIO PUMP Middle Temperature
Use the <+> or <-> keys to adjust the middle limit of the AIO PUMP
temperature.
AIO PUMP Middle. Duty Cycle (%)
Use the <+> or <-> keys to adjust the maximum AIO PUMP duty cycle.
When the CPU temperature reaches the upper limit, the AIO PUMP will
operate at the maximum duty cycle.
AIO PUMP Lower Temperature
Use the <+> or <-> keys to adjust the lower limit of the AIO PUMP
temperature. The AIO PUMP will operate at the minimum duty cycle when
the temperature is lower than the limit.
AIO PUMP Min. Duty Cycle(%)
Use the <+> or <-> keys to adjust the minimum AIO PUMP duty cycle.
When the CPU temperature is under the limit, the AIO PUMP will operate
at the minimum duty cycle.
CPU Temperature LED Switch
This item allows you to turn the CPU Temperature LED on or off.
Configuration options: [Enabled] [Disabled]