User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Extreme Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 NVMe Configuration
- 6.12 HDD/SSD SMART Information
- 6.13 APM Configuration
- 6.14 Onboard Devices Configuration
- 6.15 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
68
ROG Z690 Series BIOS Manual
6.14 Onboard Devices Configuration
The items in this menu allow you to change the onboard devices settings. Scroll down to
view the other BIOS items.
The settings and options of this menu may vary depending on your motherboard. Please
refer to the BIOS of your motherboard for the actual settings and options.
Power On By PCI-E
Allows you to enable or disable the Wake-on-LAN function of the onboard LAN controller or
other installed PCI-E LAN cards.
Configuration options: [Disabled] [Enabled]
Power On By RTC
Allows you to enable or disable the RTC (Real-Time Clock) to generate a wake event and
configure the RTC alarm date. When enabled, you can set the days, hours, minutes, or
seconds to schedule an RTC alarm date.
Configuration options: [Disabled] [Enabled]
PCIe Gen5 Redriver Driving
[Disabled] This item allows you to set to default redriving settings.
[Enabled] This item allows you to maximize the PCIE Gen5 M.2 Device performance
from the Add-on Card installed on the PCIEx16_2 optimized by ASUS
redriver settings.
Add-On Card support list: ROG Hyper M.2 Card.