User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Extreme Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thermal Configuration
- 6.8 Thunderbolt(TM) Configuration
- 6.9 Trusted Computing
- 6.10 UEFI Variables Protection
- 6.11 PCI Subsystem Settings
- 6.12 USB Configuration
- 6.13 Network Stack Configuration
- 6.14 NVMe Configuration
- 6.15 HDD/SSD SMART Information
- 6.16 APM Configuration
- 6.17 Onboard Devices Configuration
- 6.18 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
ROG Z790 Series (Intel
®
14
th
) BIOS Manual
33
Read Timing Centering 2D
Configuration options: [Auto] [Disabled] [Enabled]
Command Voltage Centering
Configuration options: [Auto] [Disabled] [Enabled]
Early Command Voltage Centering
Configuration options: [Auto] [Disabled] [Enabled]
Write Voltage Centering 2D
Configuration options: [Auto] [Disabled] [Enabled]
Read Voltage Centering 2D
Configuration options: [Auto] [Disabled] [Enabled]
Late Command Training
Configuration options: [Disabled] [Enabled] [Auto]
Round Trip Latency
Configuration options: [Auto] [Disabled] [Enabled]
Turn Around Timing Training
Configuration options: [Auto] [Disabled] [Enabled]
CMD CTL CLK Slew Rate
Configuration options: [Auto] [Disabled] [Enabled]
CMD/CTL DS & E 2D
Configuration options: [Auto] [Disabled] [Enabled]
Read Voltage Centering 1D
Configuration options: [Auto] [Disabled] [Enabled]
TxDqTCO Comp Training*
Configuration options: [Auto] [Disabled] [Enabled]
ClkTCO Comp Training*
Configuration options: [Auto] [Disabled] [Enabled]
TxDqsTCO Comp Training*
Configuration options: [Auto] [Disabled] [Enabled]
VccDLL Bypass Training*
Configuration options: [Auto] [Disabled] [Enabled]
CMD/CTL Drive Strength Up/Dn 2D
Configuration options: [Auto] [Disabled] [Enabled]
DIMM CA ODT Training
Configuration options: [Auto] [Disabled] [Enabled]
PanicVttDnLp Training*
Configuration options: [Auto] [Disabled] [Enabled]
Read Vref Decap Traning*
Configuration options: [Auto] [Disabled] [Enabled]
Vddq Training
Configuration options: [Auto] [Disabled] [Enabled]
Duty Cycle Correction Training
Configuration options: [Auto] [Disabled] [Enabled]