User Manual

ROG Z790 Series (Intel
®
14
th
) BIOS Manual
51
Negative Ratio Offset B
This will be the potential negative offset to respective ratio when package temperature
rises above threshold specified in Temperature B.
Configuration options: [Auto] [User Specify]
The following item appears only when Negative Ratio Offset B is set to [User Specify].
Ratio Offset
Use the <+> and <-> keys to adjust the value.
Configuration options: [0] - [31]
The following item appears only when Overclocking TVB is set to [Boost Until Target].
Max Boost Target in MHz
Customize the maximum Target Frequency in MHz or leave auto for auto values
based on predictions. Use the <+> and <-> keys to adjust the value.
Configuration options: [Auto] [4000] - [7000]
Overclocking TVB Global Temperature Offset Sign
This selects if positive or negative offset is desired when anyone of the Overclocking
TVB Boost Profiles are selected.
Configuration options: [+] [-]
Overclocking TVB Global Temperature Offset Value
The desired value to offset the temperature thresholds of the Overclocking TVB Boost
Profiles by should be entered here.
Configuration options: [Auto] [0] - [100]
V/F Point Offset
Offset Mode Sign 1~11
Configuration options: [+] [-]
V/F Point 1~11 Offset
Configuration options: [Auto] [0.001] - [0.999]
Tweaker’s Paradise
Initial BCLK Frequency
Allows you to set a different BCLK value during POST. May be useful for setting
a lower BCLK in scenarios where memory training is not stable at a higher BCLK
(a large frequency gap between BCLK Frequency and Initial frequency is not
recommended). Applies the same value as BCLK Frequency if left at default. Use
the <+> and <-> keys to adjust the value. The values range from 80.000MHz to
1000.000MHz with an interval of 0.050MHz.
Configuration options: [Auto] [80.0000] - [1000.00000]
BCLK Amplitude
Allows you to set the magnitude of the reference BCLK supplied to the processor.
Higher values may improve overclocking stability.
Configuration options: [Auto] [800mV] [900mV]