User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Extreme Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thermal Configuration
- 6.8 Thunderbolt(TM) Configuration
- 6.9 Trusted Computing
- 6.10 UEFI Variables Protection
- 6.11 PCI Subsystem Settings
- 6.12 USB Configuration
- 6.13 Network Stack Configuration
- 6.14 NVMe Configuration
- 6.15 HDD/SSD SMART Information
- 6.16 APM Configuration
- 6.17 Onboard Devices Configuration
- 6.18 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
ROG Z790 Series (Intel
®
14
th
) BIOS Manual
75
Processor Thermal Device
Allows you to enable or disable Processor Thermal Device.
Configuration options: [Disabled] [SA Thermal Device]
The following item appears only when Processor Thermal Device is set to [SA Thermal
Device].
PPCC Step Size
Allows you to set the step size for Turbo power limit (RAPL) control.
Configuration options: [0.5 Watts] [1.0 Watts] [1.5 Watts] [2.0 Watts]
Intel(R) Dynamic Tuning Technology Configuration
An Integer containing the Intel(R) Dynamic Tuning Technology Configuration bitmap:
BIT0 [Generic UI Access Control] (0=enable, 1=disable)
BIT1 [Restricted UI Access Control] (0=enable, 1=disable)
BIT2 [shell Access Control] (0=enable, 1=disable)
BIT3 [Environment Monitoring Report Control] (0=report, 1=silent)
BIT4 [Thermal Mitigation Report Control] (0=silent, 1=report)
BIT5 [Thermal Policy Report Control] (0=silent, 1=report)
Configuration options: [0] - [255]
Charger participant
Allows you to enable or disable Charger device.
Configuration options: [Disabled] [Enabled]
Power participant
Allows you to enable or disable Power participant.
Configuration options: [Disabled] [Enabled]
Battery Participant
Allows you to enable or disable Battery participant.
Configuration options: [Disabled] [Enabled]
PCH FIVR Participant
Allows you to enable or disable PCH FIVR Participant
Configuration options: [Disabled] [Enabled]
OEM variable and Object
This submenu allows you to configure OEM variable and Object options.
Design Variable 0~5
An integer between 0-255. This allows OEM’s to customize Intel(R) Dynamic Tuning
Technology behavior based on platform changes.
Configuration options: [0] - [255]
PPCC Object
Allows you to enable or disable PPCC object for validation.
Configuration options: [Disabled] [Enabled]
ARTG Object
Allows you to enable or disable ARTG object for validation.
Configuration options: [Disabled] [Enabled]
PMAX Object
Allows you to enable or disable PMAX object for validation.
Configuration options: [Disabled] [Enabled]