User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Extreme Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thermal Configuration
- 6.8 Thunderbolt(TM) Configuration
- 6.9 Trusted Computing
- 6.10 UEFI Variables Protection
- 6.11 PCI Subsystem Settings
- 6.12 USB Configuration
- 6.13 Network Stack Configuration
- 6.14 NVMe Configuration
- 6.15 HDD/SSD SMART Information
- 6.16 APM Configuration
- 6.17 Onboard Devices Configuration
- 6.18 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
24
ROG Z790 Series (Intel
®
14
th
) BIOS Manual
tXPDLL
Configuration options: [Auto] [0] - [127]
Misc.
Refresh Hp Wm
Configuration options: [Auto] [0] - [15]
Refresh Panic Wm
Configuration options: [Auto] [0] - [15]
Refresh Abr Release
Configuration options: [Auto] [0] - [15]
tXSR
Configuration options: [Auto] [0] - [8191]
DRAM Frequency
You can customize a different DRAM Frequency with this option. Setting this will take a
longer time for training Memory.
• The configuration options for this item vary depending on the DIMM model you
installed on the motherboard.
• The DRAM Frequency specified must be derived from the same Memory
Controller:DRAM Frequency Ratio (i.e., 1:1 or 1:2 or 1:4) and the same Ref Clock
Base (i.e., 100 or 133).
Performance Core Ratio
[Auto] The system will adjust all Performance core ratios automatically.
[Sync All Cores] Configure a core ratio limit to synchronize all Performance
cores.
[Sync All Cores(+1 to 2)] Similar to Sync All Cores, but additional bin added to top 2
cores.
[By Core Usage] Configure the ratio limits for active cores depending on how
many Performance cores are being utilized.
[AI Optimized] Use AI to optimize the Performance core ratios.
• The [AI Optimized] item appears only when you use an unlocked CPU.
• The following item appears only when Performance Core Ratio is set to [Sync All
Cores] or [Sync All Cored(+1 to 2)].
ALL-Core Ratio Limit
Enter [Auto] to apply the CPU default Turbo Ratio setting or manually assign a Core ratio
limit to synchronize all cores. Use the <+> or <-> to adjust the value.
Configuration options: [Auto] [8] - [85]