User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- 2.1 Building your PC system
- 2.1.1 CPU installation
- 2.1.2 Cooling system installation
- 2.1.3 DIMM installation
- 2.1.4 M.2 installation
- 2.1.5 Additional cooling kit installation
- 2.1.6 Motherboard installation
- 2.1.7 ATX power connection
- 2.1.8 SATA device connection
- 2.1.9 Front I/O connector
- 2.1.10 Expansion card installation
- 2.1.11 Wi-Fi moving antenna installation
- 2.2 BIOS update utility
- 2.3 Motherboard rear and audio connections
- 2.4 Starting up for the first time
- 2.5 Turning off the computer
- 2.1 Building your PC system
- Chapter 3: BIOS and RAID Support
- Appendix
2-16
Chapter 2: Basic Installation
Chapter 2
2.1.5 Additional cooling kit installation
To install the VRM fan holder
• You may install a 12V (1A, 12W), 40mm x 40mm fan onto the fan holder if you
require additional cooling for your motherboard.
• The fan is purchased separately.
To install the DDR5 fan holder
• You may install 12V (1A, 12W), 40mm x 40mm/50mm x 50mm/60mm x 60mm fans
onto the fan holder if you require additional cooling for your motherboard.
• The fan is purchased separately.