E-Manual

Table Of Contents

Chapter 1: Basics

Charging your ROG Phone

Your ROG Phone comes partially charged but you must charge it fully before using it for the rst

time. Read the following important notices and cautions before charging your device.

IMPORTANT!

• Peel o the protective lm on the AC power adapter and USB Type-C cable before using it with your

device.

• Ensure to plug the AC power adapter to a compatible power outlet. You can plug the AC power

adapter to any compatible 100~240 V outlet.

• The output voltage of the AC power adapter for this device is +5V-20V 3A, 65W (WW version).

• When using your ROG Phone while plugged-in to a power outlet, the power outlet must be near

your device and easily accessible.

• To conserve electricity, unplug the AC power adapter from the power outlet when not in use.

• Do not place heavy objects on top of your ROG Phone.

CAUTION!

• While charging, your ROG Phone can become warm. This is normal, however, if your device becomes

unusually hot, disconnect the USB Type-C cable from your device and send the device, including the

AC power adapter and cable to an ASUS-qualied service personnel.

• To prevent any damage to your ROG Phone, AC adapter, or USB Type-C cable, ensure that the USB

Type-C cable, AC adapter, and your device are connected properly before charging.

To charge your ROG Phone:

1. Connect the USB cable to the power adapter.

2. Connect the USB cable to your ROG Phone.

3. Plug the AC power adapter to a grounded power outlet.