User's Manual

111
4.10 Administration
4.10.1 Operation Mode
The Operation Mode page allows you to select the appropriate
mode for your network.
To set up the operating mode:
1. From the navigation panel, go to Advanced Settings >
Administration > Operation Mode tab.
2. Select any of these operation modes:
• Wireless router mode (default): In wireless router mode,
the wireless router connects to the Internet and provides
Internet access to available devices on its own local network.
• Access Point mode: In this mode, the router creates a new
wireless network on an exising network.
• Media Bridge: This setup requires two wireless routers.
The second router serves as a media bridge where multiple
devices such as Smart TVs and gaming consoles can be
connected via ethernet.
• Repeater mode: In Repeater mode, GT-AX11000 wirelessly
connects to an existing wireless network to extend the
wireless coverage. In this mode, the firewall, IP sharing, and
NAT functions are disabled.
• AiMesh mode: This setup requires at least two ASUS routers
which support AiMesh. Enable AiMesh node, and log in