User's Manual
Table Of Contents
- 1 Getting to know your wireless router
- 2 Getting started
- 3 Configuring the General and Advanced Settings
- 3.1 Logging into the Web GUI
- 3.2 Administration
- 3.3 AiCloud 2.0
- 3.4 ASUS AiMesh
- 3.5 AiProtection
- 3.6 Dash Board
- 3.7 Firewall
- 3.8 Game Acceleration
- 3.9 Game Radar
- 3.10 Guest Network
- 3.11 IPv6
- 3.12 LAN
- 3.13 Network Map
- 3.14 Open NAT & Game Profile
- 3.15 Smart Connect
- 3.16 System Log
- 3.17 Traffic Analyzer
- 3.18 USB Application
- 3.19 VPN
- 3.20 WAN
- 3.21 Wi-Fi Radar
- 3.22 Wireless
- 4 Utilities
- 5 Troubleshooting
- Appendices
74
Steering Trigger Condition
This set of controls sets the criteria to initiate band steering.
• Bandwidth Utilization
When bandwidth use exceeds this percentage, steering will be
initiated.
• Enable Load Balance
This controls load balancing.
• RSSI
If the received signal level of any associated client meets this
criteria, steering will be triggered.
• PHY Rate Less / PHY Rate Greater
These controls determine STA link rates that trigger band
steering.
• VHT
This controls determines how 802.11ac and non-ac clients are
handled.
• ALL (default) means any type of client can trigger steering.
• AC only means a client must support 802.11ac to trigger
steering.
• Not-allowed means only non-802.11ac clients will trigger
steering, i.e. 802.11a/b/g/n.