User's Manual

11
1.5 Setup Requirements
To set up your wireless network, you need a computer that meets
the following system requirements:
• EthernetRJ-45(LAN)port(10Base-T/100Base-
TX/1000BaseTX)
• IEEE802.11a/b/g/n/ac/axwirelesscapability
• AninstalledTCP/IPservice
• WebbrowsersuchasInternetExplorer,Firefox,Safari,or
Google Chrome
NOTES:
• Ifyourcomputerdoesnothavebuilt-inwirelesscapabilities,you
may install an IEEE 802.11a/b/g/n/ac/ax WLAN adapter to your
computer to connect to the network.
• Withitstriplebandtechnology,yourwirelessroutersupports
2.4GHz, 5GHz-1 and 5GHz-2 wireless signals simultaneously. This
allows you to do Internet-related activities such as Internet surfing
or reading/writing e-mail messages using the 2.4GHz band while
simultaneously streaming high-definition audio/video files such
as movies or music using the 5GHz band.
• SomeIEEE802.11ndevicesthatyouwanttoconnecttoyour
network may or may not support 5GHz band. Refer to the device's
manual for specifications.
• TheEthernetRJ-45cablesthatwillbeusedtoconnectthe
network devices should not exceed 100 meters.
IMPORTANT!
• Somewirelessadaptersmighthaveconnectivityissuesto
802.11ax WiFi APs.
• Ifyou’reexperiencingsuchissue,pleaseensureyouupdatethe
driver to the latest version. Check your manufacturer's official
support site where software drivers, updates, and other related
information can be obtained.
  •Realtek:https://www.realtek.com/en/downloads
 •Mediatek:https://www.mediatek.com/products/connectivity-
and-networking/broadband-wifi
 •Intel:https://downloadcenter.intel.com/