User's Manual
Table Of Contents
- 1 Getting to know your wireless router
- 2 Getting started
- 3 Configuring the General and Advanced Settings of ROG Gaming Center
- 3.1 Logging into the Web GUI
- 3.2 Administration
- 3.3 AiCloud 2.0
- 3.4 AiProtection
- 3.5 Dash Board
- 3.6 Firewall
- 3.7 Game Acceleration
- 3.8 Game Radar
- 3.9 Guest Network
- 3.10 IPv6
- 3.11 LAN
- 3.12 Network Map
- 3.13 Open NAT & Game Profile
- 3.14 Smart Connect
- 3.15 System Log
- 3.16 Traffic Analyzer
- 3.17 USB Application
- 3.18 VPN
- 3.19 WAN
- 3.20 Wi-Fi Radar
- 3.21 Wireless
- 4 Utilities
- 5 Troubleshooting
- Appendices
122
3. Set a static IP on your computer and use the following to set up
your TCP/IP settings:
IP address: 192.168.1.x
Subnet mask: 255.255.255.0
4. From your computer’s desktop, click
Start > All Programs > ASUS Utility GT-AX6000 Wireless
Router > Firmware Restoration.
5. Specify a firmware file, then click Upload.
NOTE: This is not a firmware upgrade utility and cannot be used on
a working ASUS Wireless Router. Normal firmware upgrades must be
done through the web interface. Refer to Chapter 3: Configuring
the General and Advanced Settings of ROG Gaming Center for
more details.
5.3 Setting up your printer server
5.3.1 ASUS EZ Printer Sharing
ASUS EZ Printing Sharing utility allows you to connect a USB
printer to your wireless router’s USB port and set up the print
server. This allows your network clients to print and scan files
wirelessly.