User's Manual
Table Of Contents
- 1 Getting to know your wireless router
- 2 Getting started
- 3 Configuring the General and Advanced Settings
- 3.1 Logging into the Web GUI
- 3.2 Administration
- 3.3 AiCloud 2.0
- 3.4 ASUS AiMesh
- 3.5 AiProtection
- 3.6 Dash Board
- 3.7 Firewall
- 3.8 Game Acceleration
- 3.9 Game Radar
- 3.10 Guest Network Pro
- 3.11 IPv6
- 3.12 LAN
- 3.13 Network Map
- 3.14 Open NAT & Game Profile
- 3.15 Parental Controls
- 3.16 Smart Connect
- 3.17 System Log
- 3.18 Traffic Analyzer
- 3.19 USB Application
- 3.20 VPN
- 3.21 WAN
- 3.22 Wireless
- 4 Utilities
- 5 Troubleshooting
- Appendices
111
NOTES:
DDNS service will not work under these conditions:
• When the wireless router is using a private WAN IP address
(192.168.x.x, 10.x.x.x, or 172.16.x.x), as indicated by a yellow text.
• The router may be on a network that uses multiple NAT tables.
3.21.7 NAT Passthrough
NAT Passthrough allows a Virtual Private Network (VPN)
connection to pass through the router to the network clients.
PPTP Passthrough, L2TP Passthrough, IPsec Passthrough and RTSP
Passthrough are enabled by default.
To enable / disable the NAT Passthrough settings, go to the
Advanced Settings > WAN > NAT Passthrough. When done,
click Apply.