User's Manual
Table Of Contents
- 1 Getting to know your wireless router
- 2 Getting started
- 3 Configuring the General and Advanced Settings
- 3.1 Logging into the Web GUI
- 3.2 Administration
- 3.3 AiCloud 2.0
- 3.4 ASUS AiMesh
- 3.5 AiProtection
- 3.6 Dash Board
- 3.7 Firewall
- 3.8 Game Acceleration
- 3.9 Game Radar
- 3.10 Guest Network Pro
- 3.11 IPv6
- 3.12 LAN
- 3.13 Network Map
- 3.14 Open NAT & Game Profile
- 3.15 Parental Controls
- 3.16 Smart Connect
- 3.17 System Log
- 3.18 Traffic Analyzer
- 3.19 USB Application
- 3.20 VPN
- 3.21 WAN
- 3.22 Wireless
- 4 Utilities
- 5 Troubleshooting
- Appendices
22
3.2 Administration
3.2.1 Operation Mode
The Operation Mode page allows you to select the appropriate
mode for your network.
To set up the operating mode:
1. From the navigation panel, go to Advanced Settings >
Administration > Operation Mode.
2. Select any of these operation modes:
• Wireless router mode / AiMesh Router mode (Default):
In wireless router mode, the wireless router connects to the
Internet and provides Internet access to available devices on
its own local network.
• Access Point(AP) / AiMesh Router in AP mode: In this
mode, the router creates a new wireless network on an
existing network.
• Repeater mode: In Repeater mode, GT-BE98 wirelessly
connects to an existing wireless network to extend the
wireless coverage. In this mode, the firewall, IP sharing, and
NAT functions are disabled.
• Media Bridge: This setup requires two wireless routers.
The second router serves as a media bridge where multiple
devices such as Smart TVs and gaming consoles can be
connected via ethernet.