User's Manual
Table Of Contents
- 1 Getting to know your wireless router
- 2 Getting started
- 3 Configuring the General and Advanced Settings
- 3.1 Logging into the Web GUI
- 3.2 Administration
- 3.3 AiCloud 2.0
- 3.4 ASUS AiMesh
- 3.5 AiProtection
- 3.6 Dash Board
- 3.7 Firewall
- 3.8 Game Acceleration
- 3.9 Game Radar
- 3.10 Guest Network Pro
- 3.11 IPv6
- 3.12 LAN
- 3.13 Network Map
- 3.14 Open NAT & Game Profile
- 3.15 Parental Controls
- 3.16 Smart Connect
- 3.17 System Log
- 3.18 Traffic Analyzer
- 3.19 USB Application
- 3.20 VPN
- 3.21 WAN
- 3.22 Wireless
- 4 Utilities
- 5 Troubleshooting
- Appendices
8
1.3 Your wireless router
Power (DCIN) port
Insert the bundled AC adapter into this port and connect your router to a power source.
Power switch
Press this switch to power on or off the system.
USB 2.0 port
Insert a USB 2.0 compatible device such as a USB hard disk or USB flash drive into this
port.
USB 3.2 Gen 1 port
Insert a USB 3.2 Gen 1 compatible device such as a USB hard disk or USB flash drive into
this port.
Reset button
This button resets or restores the system to its factory default settings.
2.5GE LAN2-4 ports
Connect network cables into these ports to establish 2.5GE LAN connection.
2.5GE WAN / LAN1 port
Connect a network cable into this port to establish 2.5GE WAN / LAN1 connection.
10GE WAN / LAN1 port
Connect a network cable into this port to establish 10GE WAN / LAN1 connection.
1GE LAN5 port
Connect a network cable into this port to establish 1GE LAN5 connection.
10GE LAN6 port
Connect a network cable into this port to prioritize the packets.
10 / 2.5GE WAN (Internet) LED
Red: No IP or no physical connection.
On: Has physical connection to a wide area network (WAN).
6GH
z