User Manual

ROG STRIX B450-F GAMING II BIOS Manual
21
Core Preformance Boost
This item allows you to enable or disable automatically overclocking the CPU and DRAm to
enhance system performance.
Configuration options: [Auto] [Enabled] [Disabled]
SMT Mode
This item allows you enable or disable symmetric multithreading (SMT). Select [Auto] to
enable SMT. A full reboot of the system is needed for the [Auto] option to take effect and
re-enable SMT.
Configuration options: [Auto] [Enabled] [Disabled]
If SMT is set to [Disabled], your system will not support S3 mode.
CPU Core Ratio (Per CCX)
This items in this submenu allow you to adjust Core Ratios for each CCX.
Core VID
This item allows you to specify a custom CPU core VID. Power savinf features for idle
cores (e.g. cc6 sleep) remain active.
Configuration options: [Auto] [0.700] - [1.550]
CCD0
CCX0 Ratio
This item allows you to specify a custom Core Ratio for this CCX.
Configuration options: [Auto] [23.00] - [63.75]
CCX1 Ratio
This item allows you to specify a custom Core Ratio for this CCX.
Configuration options: [Auto] [23.00] - [63.75]
CCD1
CCX0 Ratio
This item allows you to specify a custom Core Ratio for this CCX.
Configuration options: [Auto] [23.00] - [63.75]
CCX1 Ratio
This item allows you to specify a custom Core Ratio for this CCX.
Configuration options: [Auto] [23.00] - [63.75]
TPU
This item allows you to automatically overclock the CPU and DRAM frequencies and voltage
for an enhanced system performance.
[Keep Current Settings] Keep the current settings without changing anything.
[TPU I] Applies air cooling overclocking conditions.
[TPU II] Applies water cooling overclocking conditions.
Ensure to use water cooling device before selecting [TPU II].