User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 CPU Configuration
- 6.4 ROG Effects
- 6.5 SATA Configuration
- 6.6 Onboard Devices Configuration
- 6.7 APM Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 HDD/SSD SMART Information
- 6.12 AMD Overclocking
- 6.13 AMD CBS
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
ROG STRIX B450-F GAMING II BIOS Manual
35
PCIEX16_1 Mode
This item allows you to set the link speed for the first VGA slot.
Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3]
PCIEX16_2 Mode
This item allows you to set the link speed for the second VGA slot.
Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3]
M.2_1 Link Mode
This item allows you to set the M.2_1 Device link speed.
Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3]
M.2_2 Link Mode
This item allows you to set the M.2_1 Device link speed.
Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3]
SB Link Mode
This item allows you to set the Southbridge link speed.
Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3]
RGB LED lighting
When system is in working state
This item allows you to turn the RGB LED lighting on or off when the system is in the
working state.
[On]: Motherboard LEDs, RGB and ADD header(s) will light up in
S0(working) state.
[Off]: Motherboard LEDs, RGB and ADD header(s) will not light up in
S0(working) state.
• The RGB Header(s) and Addressable Header(s) will only work under the S0
(working) state.
• When ErP Ready is enabled, LEDs, RGB and ADD header(s) will not light up in any
state.
When system is in sleep, hibernate or soft off states
This item allows you to turn the RGB LED lighting on or off when the system is in the
sleep, hibernate or soft off states.
[On]: Motherboard LEDs will light up in S3(sleep), S4(hibernate), and
S5(soft off) states.
[Off]: Motherboard LEDs will not light up in S3(sleep), S4(hibernate), and
S5(soft off) states.
• The RGB Header(s) and Addressable Header(s) will only work under the S0
(working) state.
• When ErP Ready is enabled, LEDs, RGB and ADD header(s) will not light up in any
state.