User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 CPU Configuration
- 6.4 ROG Effects
- 6.5 SATA Configuration
- 6.6 Onboard Devices Configuration
- 6.7 APM Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 HDD/SSD SMART Information
- 6.12 AMD Overclocking
- 6.13 AMD CBS
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
ROG STRIX B450-F GAMING II BIOS Manual
57
The following items appear only when CAD Bus Drive Strength User Controls is set to
[Manual].
ClkDrvStren
Configuration options: [Auto] [120.0 Ohm] [60.0 Ohm] [40.0 Ohm] [30.0
Ohm] [24.0 Ohm] [20.0 Ohm]
AddrCmdDrvStren
Configuration options: [Auto] [120.0 Ohm] [60.0 Ohm] [40.0 Ohm] [30.0
Ohm] [24.0 Ohm] [20.0 Ohm]
CsOdtDrvStren
Configuration options: [Auto] [120.0 Ohm] [60.0 Ohm] [40.0 Ohm] [30.0
Ohm] [24.0 Ohm] [20.0 Ohm]
CkeDrvStren
Configuration options: [Auto] [120.0 Ohm] [60.0 Ohm] [40.0 Ohm] [30.0
Ohm] [24.0 Ohm] [20.0 Ohm]
Data Bus Configuration
Data Bus Configuration User Controls
This item allows you to specify the mode for drive strength.
Configuration options: [Auto] [Manual]
The following items appear only when Data Bus Configuration User Controls is set to
[Manual].
RttNom
Configuration options: [Auto] [Rtt_Nom Disable] [RZQ/4] [RZQ/2] [RZQ/6]
[RZQ/1] [RZQ/5] [RZQ/3] [RZQ/7]
RttWr
Configuration options: [Auto] [Dynamic ODT Off] [RZQ/2] [RZQ/1] [Hi-Z]
[80 Ohm]
RttPark
Configuration options: [Auto] [Rtt_PARK Disable] [RZQ/4] [RZQ/2] [RZQ/6]
[RZQ/1] [RZQ/5] [RZQ/3] [RZQ/7]
Common RAS
Data Poisoning
Configuration options: [Enabled] [Disabled] [Auto]
DRAM Post Package Repair
Configuration options: [Enabled] [Disabled]
RCD Parity
Configuration options: [Enabled] [Disabled] [Auto]
DRAM Address Command Parity Retry
Configuration options: [Enabled] [Disabled] [Auto]