User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 CPU Configuration
- 6.4 ROG Effects
- 6.5 SATA Configuration
- 6.6 Onboard Devices Configuration
- 6.7 APM Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 HDD/SSD SMART Information
- 6.12 AMD Overclocking
- 6.13 AMD CBS
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
72
ROG STRIX B450-F GAMING II BIOS Manual
The following item appears only when you set Boot Logo Display to [Enabled].
Post Delay Time
This item allows you to select a desired additional POST waiting time to easily enter
the BIOS Setup. You can only execute the POST delay time during normal boot.
Configuration options: [0 sec] - [10 sec]
This feature only works when set under normal boot.
The following item appears only when you set Boot Logo Display to [Disabled].
Post Report
This item allows you to select a desired POST report waiting time.
Configuration options: [1 sec] - [10 sec] [Until Press ESC]
Boot up NumLock State
This item allows you to enable or disable power-on state of the NumLock.
Configuration options: [On] [Off]
Wait For ‘F1’ If Error
This item allows your system to wait for the <F1> key to be pressed when error
occurs.
Configuration options: [Disabled] [Enabled]
Option ROM Messages
[Force BIOS] The Option ROM Messages will be shown during the POST.
[Keep Current] Only the ASUS logo will be shown during the POST.
Interrupt 19 Capture
[Enabled] Execute the trap right away.
[Disabled] Execute the trap during legacy boot.
Setup Mode
[Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after
POST.
[EZ Mode] This item allows you to go to EZ Mode of the BIOS after POST.
CSM (Compatibility Support Module)
This item allows you to configure the CSM (Compatibility Support Module) items to fully
support the various VGA, bootable devices and add-on devices for better compatibility.
Launch CSM
[Auto] The system automatically detects the bootable devices and the add-
on devices.
[Enabled] For better compatibility, enable the CSM to fully support the non-
UEFI driver add-on devices or the Windows
®
UEFI mode.
[Disabled] Disable the CSM to fully support the non-UEFI driver add-on devices
or the Windows
®
UEFI mode.