User’s Manual

ROG STRIX B460-G GAMING BIOS Manual
31
IA DC Load Line
This item allows you to set the DC loadline defined in 1/100 mOhms. Use the <+> and
<-> keys to adjust the value.
Configuration options: [Auto] [0.01] - [62.49]
TVB Voltage Optimizations
This item controls thermal based voltage optimizations for processors that implement
the Intel Thermal Velocity Boost (TVB) feature.
Configuration options: [Auto] [Enabled] [Disabled]
TVB Ratio Clipping
This service controls Core frequency reduction caused by high package temperatures
for processors that implement the Intel Thermal Velocity Boost (TVB) feature. It is
required to be disabled for supporting overclocking at frequencies higher than the
default max turbo frequency. Uses Overclocking Mailbox command 0x18/0x19.
Configuration options: [Auto] [Enabled] [Disabled]
V-Max Stress
If this item is set to [Enabled], Frequency may be clipped if the max voltage on the
silicon is too high. Frequency will not be clipped if disabled.
Configuration options: [Auto] [Enabled] [Disabled]
Min. CPU Cache Ratio
This item allows you to set the minimum possible CPU cache ratio. Use the <+> and <->
keys to adjust the value.
Configuration options: [Auto] [8] - [44]
Max. CPU Cache Ratio
This item allows you to set the maximum possible CPU cache ratio. Use the <+> and <->
keys to adjust the value.
Configuration options: [Auto] [8] - [44]
Max. CPU Graphics Ratio
This item allows you to configure the CPU graphics ratio. The ratio may vary depending on
the system loading.
Configuration options: [Auto] [1] - [23]
CPU Core/Cache Voltage
Configures the mode of Voltage fed to the cores of the processor.
Configuration options: [Auto] [Manual Mode] [Offset Mode]
The following item appears only when CPU Core/Cache Voltage is set to [Manual
Mode].
CPU Core Voltage Override
Allows you to configure the CPU Core voltage.
Configuration options: [Auto] [0.600] - [1.700]