User’s Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 PCI Subsystem Settings
- 6.8 USB Configuration
- 6.9 Network Stack Configuration
- 6.10 NVMe Configuration
- 6.11 Onboard Devices Configuration
- 6.12 APM Configuration
- 6.13 HDD/SSD SMART Information
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
46
ROG STRIX B460-G GAMING BIOS Manual
When system is in sleep, hibernate or soft off states
This item allows you to turn the RGB LED lighting on or off when the system is in the
sleep, hibernate or soft off states.
[All On]: RGB LEDs and Functional LEDs will behave normally.
[Stealth Mode]: All LEDs will be disabled.
[Aura Only]: RGB LEDs will light up, while all functional LEDs will be
disabled.
[Aura Off]: Functional LEDs behave normally, while RGB LEDs will be
disabled.
The RGB Header(s) and Addressable Header(s) will only work under the S0 (working)
state.
M.2_1 Configuration
[Auto] Auto-detects the M.2_1 device mode. If SATA device is detected,
SATA6G_1 will be disabled.
[SATA] Only supports M.2_1 SATA devices. Please note that SATA6G_1 port
cannot be used in this mode.
[PCIE] Only supports M.2_1 PCIe devices.
PCIEX16_2 Configuration
[Auto] Automatically detects the device installed.
(1) When a device is installed in PCIEX1 slot socket, PCIEX16_2 only
runs in X2 Mode.
(2) When there are no devices installed in PCIEX1 slot socket, PCIEX16_2
can run in X4 Mode.
[X4 Mode] PCIEX16_2 can run in X4 Mode. PCIEX1 is disabled.
Serial Port Configuration
This submenu allows you to set parameters for Serial Port.
This item will only function if there is a serial port (COM) connector on your motherboard.
Serial Port
This item allows you to enable or disable the Serial port.
Configuration options: [On] [Off]
The following item appears only when Serial Port is set to [On].
Change settings
This item allows you to select an optimal setting for super IO device.
Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4]
[IO=2E8h; IRQ=3]