User’s Manual

ROG STRIX B550-E GAMING BIOS Manual
43
This is a VID value in hex instead of a voltage level and is applied when the DDR speed is
above 2933. Voltage (V)=1.55V-Hex2Dec(VID) x 0.00625V.
UCLK DIV1 MODE
Conguration options: [Auto] [UCLK==MEMCLK] [UCLK==MEMCLK/2]
VDDP Voltage Control
Conguration options: [Auto] [Manual]
The following item appears only when you set VDDP Voltage Control to [Manual].
VDDP Voltage
The valid value ranges from 0 to 2047.
VDDG Voltage Control
Conguration options: [Auto] [Manual]
The following item appears only when you set VDDG Voltage Control to [Manual].
VDDG Voltage
The valid value ranges from 0 to 2047.
SoC/Uncore OC Mode
Conguration options: [Auto] [Enabled] [Disabled]
LN2 Mode
Conguration options: [Auto] [Enabled] [Disabled]
ACS Enable
Conguration options: [Auto] [Enable] [Disabled]
PCIe ARI Support
Conguration options: [Auto] [Enable] [Disable]
PCIe ARI Enumeration
Conguration options: [Auto] [Enable] [Disable]
PCIe Ten Bit Tag Support
Conguration options: [Auto] [Enable] [Disable]
SMU Common Options
Max Voltage Offset
Conguration options: [Auto] [25] [50] [75] [100]
cTDP Control
Conguration options: [Auto] [Manual]
The following item appears only when you set cTDP Control to [Manual].
cTDP
cTDP [W] 0 = Invalid value.