User’s Manual
Table Of Contents
- 1.1 Knowing BIOS
- 1.2 BIOS setup program
- 1.3 My Favorites
- 1.4 Main menu
- 1.5 Ai Tweaker menu
- 1.6 Advanced menu
- 1.6.1 AMD fTPM configuration
- 1.6.2 CPU Configuration
- 1.6.3 SATA Configuration
- 1.6.4 Onboard Devices Configuration
- 1.6.5 APM Configuration
- 1.6.6 PCI Subsystem Settings
- 1.6.7 USB Configuration
- 1.6.8 Network Stack Configuration
- 1.6.9 HDD/SSD SMART Information
- 1.6.10 NVMe Configuration
- 1.6.11 AMD PBS
- 1.6.12 AMD Overclocking
- 1.6.13 AMD CBS
- 1.7 Monitor menu
- 1.8 Boot menu
- 1.9 Tool menu
- 1.10 Exit menu
- 1.11 Updating BIOS
ROG STRIX B550-E GAMING BIOS Manual
39
xGMI encryption control
Conguration options: [Disabled] [Enabled] [Auto]
CAKE CRC perf bounds Control
Conguration options: [Auto] [Manual]
The following item appears only when you set CAKE CRC perf bounds Control to
[Manual].
CAKE CRC perf bounds
Specify the amount of performance loss that is acceptable to enable CRC
protection. The valid value range from 0 (disabled) to 1000000 (10%) with
an increment of 0.00001%.
4-link xGMI max speed
Conguration options: [6.4Gbps] [7.467Gbps] [8.533Gbps] [9.6Gbps]
[10.667Gbps] [11Gbps] [12Gbps] ~ [25Gbps] [Auto]
3-link xGMI max speed
Conguration options: [6.4Gbps] [7.467Gbps] [8.533Gbps] [9.6Gbps]
[10.667Gbps] [11Gbps] [12Gbps] ~ [25Gbps] [Auto]
xGMI TXEQ Mode
Conguration options: [TXEQ_Disabled] [TXEQ_Lane] [TXEQ_Link]
[TXEQ_RX_Vet] [Auto]
PcsCG control
Conguration options: [Auto] [Enable]
Disable DF to external downstream IP SyncFloodPropagation
Conguration options: [Sync flood disabled] [Sync flood enabled] [Auto]
Disable DF sync flood propagation
Conguration options: [Sync flood disabled] [Sync flood enabled] [Auto]
CC6 memory region encryption
Conguration options: [Sync flood disabled] [Sync flood enabled] [Auto]
Memory Clear
Conguration options: [Sync flood disabled] [Sync flood enabled] [Auto]
UMC Common Options
The options in this submenu allows you to congure UMC common options.
DDR4 Common Options
DRAM Timing Configuration
Allows you to Decline or Accept DRAM timing conguration.
DRAM Controller Configuration
DRAM Power Options
Power Down Enable
Conguration options: [Auto] [Enabled] [Disabled]