User Manual

24
ROG STRIX B760 Series BIOS Manual
MCH Full Check
Allows you to enable MCH Full Check to enhance the system stability, or disable it to
enhance DRAM overclocking capability.
Conguration options: [Auto] [Disabled] [Enabled]
Mem Over Clock Fail Count
Conguration options: [Auto] [1] – [255]
Training Profile
Allows you to select DIMM Training Prole.
Conguration options: [Auto] [Standard Prole] [ASUS User Prole]
RxDfe
Allows you to enable or disable DFE on SOC Rx.
Conguration options: [Auto] [Disabled] [Enabled]
Mrc Training Loop Count
Allows you to select the exponential number of loops to run the test.
Conguration options: [Auto] [0] – [32]
DRAM CLK Period
Allows you to select the DRAM clock period. Conguration options: [Auto] [1] – [58]
Dll_bwsel
Conguration options: [Auto] [0] – [63]
Controller 0, Channel 0 Control / Controller 0, Channel 1 Control / Controller 1,
Channel 0 Control / Controller 1, Channel 1 Control
Conguration options: [Auto] [Disabled] [Enabled]
MC_Vref0 / MC_Vref1 / MC_Vref2
Conguration options: [Auto] [0] – [65533]
Configure Memory Dynamic Frequency Switching
Dynamic Memory Boost
Allows you to enable or disable Dynamic Memory Boost feature. The feature allows
automatic switching between deafult SPD Prole frequency and selected XMP prole
frequency, and is only valid if an XMP Prole is selected.
Conguration options: [Disabled] [Enabled]
Realtime Memory Frequency
Allows you to enable or disable Realtime Memory Frequency feature. The feature
allows manual switching in runtime between deafult SPD Prole frequency and
selected XMP prole frequency, and is only valid if an XMP Prole is selected.
Conguration options: [Disabled] [Enabled]
SA GV
Allows you to enable or disable System Agent Geyserville feature. If enabled, it is
recommended to leave options at parked values for best compatibility. Enabling this
feature requires a longer boot time.
[Disabled] Allows you to x to a specic point.
[Enabled] Allows you to enable frequency switching.