User Manual
Table Of Contents
- 1 Knowing BIOS
- 2 BIOS setup program
- 3 QFan Control
- 4 My Favorites
- 5 Main menu
- 6 Ai Tweaker menu
- 7 Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 Thunderbolt(TM) Configuration
- 7.8 UEFI Variables Protection
- 7.9 PCI Subsystem Settings
- 7.10 USB Configuration
- 7.11 Network Stack Configuration
- 7.12 NVMe Configuration
- 7.13 HDD/SSD SMART Information
- 7.14 APM Configuration
- 7.15 Onboard Devices Configuration
- 8 Monitor menu
- 9 Boot menu
- 10 Tool menu
- 11 Exit menu
- 12 Updating BIOS
ROG STRIX B760 Series BIOS Manual
45
7.11 Network Stack Conguration
The items in this menu allow you to enable or disable the UEFI network stack.
Network Stack
Allows you to enable or disable the UEFI network stack.
Conguration options: [Disabled] [Enabled]
The following items appear only when you set Network Stack to [Enabled].
IPv4 PXE Support
Allows you to enable or disable the IPv4 PXE Boot Support. If this item is set to
[Disabled], IPv4 PXE boot option will not be created.
Conguration options: [Disabled] [Enabled]
IPv6 PXE Support
Allows you to enable or disable the IPv6 PXE Boot Support. If this item is set to
[Disabled], IPv6 PXE boot option will not be created.
Conguration options: [Disabled] [Enabled]
7.12 NVMe Conguration
This menu displays the NVMe controller and drive information of the connected devices. The
screen shows No NVME Device Found if no NVME device is detected.