User Manual
Table Of Contents
- 1 Knowing BIOS
- 2 BIOS setup program
- 3 QFan Control
- 4 My Favorites
- 5 Main menu
- 6 Ai Tweaker menu
- 7 Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 Thunderbolt(TM) Configuration
- 7.8 UEFI Variables Protection
- 7.9 PCI Subsystem Settings
- 7.10 USB Configuration
- 7.11 Network Stack Configuration
- 7.12 NVMe Configuration
- 7.13 HDD/SSD SMART Information
- 7.14 APM Configuration
- 7.15 Onboard Devices Configuration
- 8 Monitor menu
- 9 Boot menu
- 10 Tool menu
- 11 Exit menu
- 12 Updating BIOS
46
ROG STRIX B760 Series BIOS Manual
7.13 HDD/SSD SMART Information
This menu displays the SMART information of the connected devices.
NVM Express devices do not support SMART information.
Device
Allows you to select a device and displays its SMART information. If no HDD/SSD device is
detected on the motherboard, the eld shows [N/A].
7.14 APM Conguration
The items in this menu allow you to adjust the Advanced Power Management (APM) settings.
Restore AC Power Loss
Allows you to select the AC power state when power is re-applied after a power failure.
Conguration options: [Power On] [Power Off] [Last State]
Max Power Saving
Conguration options: [Disabled] [Enabled]
ErP Ready
Allows you to switch off some power at S4/S5 to get the system ready for ErP requirement.
When this item is set to [Enabled], all other PME options will be switched off. RGB LEDs and
RGB/Addressable RGB headers will also be disabled.
Conguration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]