User Manual
Table Of Contents
- 1 Knowing BIOS
- 2 BIOS setup program
- 3 QFan Control
- 4 My Favorites
- 5 Main menu
- 6 Ai Tweaker menu
- 7 Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 Thunderbolt(TM) Configuration
- 7.8 UEFI Variables Protection
- 7.9 PCI Subsystem Settings
- 7.10 USB Configuration
- 7.11 Network Stack Configuration
- 7.12 NVMe Configuration
- 7.13 HDD/SSD SMART Information
- 7.14 APM Configuration
- 7.15 Onboard Devices Configuration
- 8 Monitor menu
- 9 Boot menu
- 10 Tool menu
- 11 Exit menu
- 12 Updating BIOS
ROG STRIX B760 Series BIOS Manual
53
CPU Fan Point1 Duty Cycle (%)
Allows you to set the CPU Fan Point1 Duty Cycle. Conguration options: [40] –
[100]
When the source temperature is lower than the temperature of P1, the fan will operate at
the duty cycle of P1. When the source temperature is higher than the temperature of P1, the
duty cycle will be dertermined according to the P1-P2 and the source temperature.
Chassis Fan(s) Configuration
Allows you to congure the settings of the Chassis fans.
The number of the Chassis fans may vary by motherboard models.
Chassis Fan 1(~2) Q-Fan Control
These items allow you to set the control modes for chassis fans.
Conguration options: [Auto Detect] [DC Mode] [PWM Mode]
[Auto Detect] Detects the type of chassis fan installed and automatically
switches the control modes.
[DC Mode] Enables the Q-Fan control in DC mode for 3-pin fan.
[PWM Mode] Enables the Q-Fan control in PWM mode for 4-pin fan.
Chassis Fan 1(~2) Profile
Allow you to set the appropriate performance levels for chassis fans.
If Chassis FAN 1(~2) Prole is set to [Manual], we suggest raising your fan/pump duty
to 100% if your CPU temperature exceeds 75°C. Please be noted CPU performance will
throttle due to overheating with inefcient fan/pump duty.
The following items will not appear if you set Chassis Fan 1(~2) Prole to [Full Speed].
Chassis Fan 1(~2) Q-Fan Source
Chassis fans will be controlled according to the selected temperature sources.
Conguration options: [CPU] [MotherBoard] [VRM] [Chipset] [Multiple Sources]
The following items appear only when you set [Chassis Fan 1(~2) Q-Fan Source] to
[Multiple Sources].
Temperature Source 1(~2)
These items allow you to select up to three temperature sources and chassis
fans will automatically change based on the highest temperature.
Conguration options: [CPU] [MotherBoard] [VRM] [Chipset] [N/A]
Chassis Fan 1(~2) Step Up/Down
Allow you to set the values of chassis fans step up/down.
Conguration options: [0 sec] [12 sec] [25 sec] [51 sec] [76 sec] [102 sec] [127 sec]
[153 sec] [178 sec] [204 sec]
Chassis Fan 1(~2) Speed Low Limit
Allow you to set the lower speed limit for chassis fans. A warning message will
appear when the limit is reached. When set to [Ignore], no future warning message
will appear. Conguration options: [Ignore] [200 RPM] [300 RPM] [400 RPM]
[500 RPM] [600 RPM]