Configuration Guide
Table Of Contents
- About this guide
- Intel® RAID Configuration
- 1. RAID definitions
- 2. Installing storage devices
- 3. Creating a SATA RAID set in UEFI BIOS
- 4. Creating an NVMe RAID set with onboard M.2 modules in UEFI BIOS
- 5. Creating an NVMe RAID set with expansion M.2 card in UEFI BIOS
- 6. Installing the RAID controller driver during Windows® 10 or Windows® 11 OS installation
Intel
®
RAID Configuration Guide
1-17
4. Go to Advanced > Onboard Devices Configuration, and set the PCIEX16
configuration as [Dual M.2].
• Please refer to the support site or your motherboard’s user guide for more
information on the Hyper M.2 card configurations.
• The PCIEX16 configuration option may differ between models, please refer to the
actual BIOS of your motherboard for the correct item.
4. Save your changes and exit the BIOS Setup, then enter the BIOS Setup again. You
may check if the Hyper M.2 card and installed M.2 modules have been properly
recognized in EZ mode.
5. Go to Advanced > Intel(R) Rapid Storage Technology to display the Intel
®
Rapid
Storage Technology menu.