Configuration Guide
Table Of Contents
- About this guide
- Intel® RAID Configuration
- 1. RAID definitions
- 2. Installing storage devices
- 3. Creating a SATA RAID set in UEFI BIOS
- 4. Creating an NVMe RAID set with onboard M.2 modules in UEFI BIOS
- 5. Creating an NVMe RAID set with expansion M.2 card in UEFI BIOS
- 6. Installing the RAID controller driver during Windows® 10 or Windows® 11 OS installation
Intel
®
RAID Configuration Guide
1-9
And also appear in the EZ Mode menu.
3.2 Deleting a RAID set
Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when
you delete a RAID set.
To delete a RAID set:
1. From the Intel
®
Rapid Storage Technology menu, select the RAID volume you want to
delete and press <Enter>.