Motherboard ROG STRIX X570-E GAMING
T15826 第二版 2019 年 8 月發行 版權說明 © ASUSTeK Computer Inc. All rights reserved.
Offer to Provide Source Code of Certain Software This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product.
目錄內容 安全性須知........................................................................................................................................ vi 電氣方面的安全性.............................................................................................................. vi 操作方面的安全性.............................................................................................................. vi 限用物質名稱及含量列表...........................................................................................................
3.2 BIOS 設定程式................................................................................................................... 3-2 3.2.1 進階模式(Advanced Mode).................................................................... 3-3 3.2.2 EZ 模式(EZ Mode)..................................................................................... 3-6 3.2.3 Q-Fan 控制.......................................................................................................... 3-7 3.2.4 EZ Tuning Wizard.......................
安全性須知 電氣方面的安全性 • 為避免可能的電擊造成嚴重損害,在搬動電腦主機之前,請先將電腦電源線暫時 從電源插槽中拔掉。 • 當您要加入硬體裝置到系統中時,請務必先連接該裝置的訊號線,然後再連接電 源線。可能的話,在安裝硬體裝置之前先拔掉電腦的電源供應器電源線。 • 當您要從主機板連接或拔除任何的訊號線之前,請確定所有的電源線已事先拔 掉。 • 在使用介面卡或擴充卡之前,我們建議您可以先尋求專業人士的協助。這些裝置 有可能會干擾接地的迴路。 • 請確定電源供應器的電壓設定已調整到本國/本區域所使用的電壓標準值。若您不 確定您所屬區域的供應電壓值為何,請就近詢問當地的電力公司人員。 • 如果電源供應器已損壞,請不要嘗試自行修復。請將之交給專業技術服務人員或 經銷商來處理。 操作方面的安全性 • 在您安裝主機板以及加入硬體裝置之前,請務必詳加閱讀本手冊所提供的相關資 訊。 • 在使用產品之前,請確定所有的排線、電源線都已正確地連接好。若您發現有任 何重大的瑕疵,請儘速聯絡您的經銷商。 • 為避免發生電氣短路情形,請務必將所有沒用到的螺絲、迴紋針及其他零件收 好,不要遺留在主機板上或電腦主機中。 • 灰塵、濕
限用物質名稱及含量列表 限用物質及其化學符號 單元 多溴聯苯 多溴二苯醚 六價鉻 (PBB) (PBDE) (Cr+6) 鉛 (Pb) 汞 (Hg) 鎘 (Cd) 印刷電路板 ─ ○ ○ ○ ○ ○ 電子組件 ─ ○ ○ ○ ○ ○ 連接器 ─ ○ ○ ○ ○ ○ 其他及其配件 ─ ○ ○ ○ ○ ○ 備考 1. "○" 係指該項限用物質之百分比含量未超出百分比含量基準值。 備考 2.
華碩 STRIX X570-E GAMING 規格列表 中央處理器 晶片組 AMD AM4 插槽,支援第三代與第二代 AMD Ryzen™ / 第二代與第一 代 AMD Ryzen™ with Radeon™ Vega Graphics 處理器 * 請瀏覽華碩網站 https://www.asus.
華碩 STRIX X570-E GAMING 規格列表 第三代 AMD Ryzen™ 處理器 - 1 x M.2 Socket 3,支援 M Key 的 2242/2260/2280/22110 類型儲存裝置(支援 PCIE 4.0 x4 與 SATA 模式) 儲存媒體連接槽 第二代 AMD Ryzen™ / 第二代與第一代 AMD Ryzen™ with Radeon™ Vega Graphics 處理器 - 1 x M.2 Socket 3,支援 M Key 的 2242/2260/2280/22110 類型儲存裝置(支援 PCIE 3.0 x4 與 SATA 模式) AMD X570 晶片組: - 1 x M.2 Socket 3,支援 M Key 的 2242/2260/2280/22110 類型(PCIe 4.0 x 4 與 SATA 模式)儲存裝置 - 8 x SATA 6.0 Gb/s 連接埠 - 支援 RAID 0、RAID 1、RAID 10 網路功能 Realtek RTL8125-CG 2.
華碩 STRIX X570-E GAMING 規格列表 第三代 AMD Ryzen 處理器 - 4 x USB 3.2 Gen 2 連接埠(位於主機板後側面板,Type-A) 第二代 AMD Ryzen™ / 第二代與第一代 AMD Ryzen™ with Radeon™ Vega Graphics 處理器 - 4 x USB 3.2 Gen 1 連接埠(位於主機板後側面板,Type-A) USB 華碩遊戲功能 特有功能 AMD X570 晶片組 - 1 x USB 3.2 Gen 2 前面板連接插槽 - 4 x U S B 3.2 G e n 2 連接埠(位於主機板後側面板,3 x Type-A,1 x Type-C ) - 2 x USB 3.2 Gen 1 連接埠(位於前面板) - 4 x USB 2.
華碩 STRIX X570-E GAMING 規格列表 華碩 Q-Design - Q-Code - Q-LED - Q-Slot - Q-DIMM 特有功能 玩家守護者 - 記憶體過流保護 - ESD 靜電防護:網路、音效、鍵盤、滑鼠與 USB 連接埠 - 高耐用度元件 - 安全插槽 - Procool - DIGI+ VRM 數位電源控制 後側面板裝置連接埠 1 1 1 1 8 1 1 1 1 5 x x x x x x x x x x HDMI 連接埠 DispalyPort 連接埠 BIOS Flashback 按鈕 BIOS Flashback 指示燈 USB 3.2 Gen 2 連接埠(7 x Type-A,1 x Type-C) 突波防護 2.5G RJ-45 網路連接埠 突波防護 RJ-45 網路連接埠 2 x 2 Wi-Fi 模組 光纖 S/PDIF 數位音訊輸出連接埠 鍍金音效插孔 內建 I/O 裝置連接埠 1 x NODE 連接排針 1 x USB 3.2 Gen 2 前面板連接插槽 1 x USB 3.
華碩 STRIX X570-E GAMING 規格列表 內建 I/O 裝置連接埠 1 1 1 1 1 x x x x x 8-pin EATX 12V 主機板電源插槽 4-pin EATX 12V 主機板電源插槽 系統控制面板連接排針 前面板音效連接排針(AAFP) CMOS 組態資料清除接頭 BIOS 256Mb Flash ROM、UEFI AMI BIOS、PnP、WfM2.0、SM BIOS 3.2、ACPI 6.2 管理功能 WOL、PXE 公用程式 DVD 光碟 Overwolf 華碩應用程式 WinRAR 防毒軟體(OEM 版本) 支援作業系統 Windows® 10(64-bit) 主機板尺寸 ATX 型式,12 x 9.6 吋(30.5 x 24.
建立 PC 系統所需的其他工具與元件 一袋螺絲 Phillips (十字) 螺絲起子 PC 機殼 電源供應裝置 AMD AM4 中央處理器 AMD AM4/AM3 相容處理器風扇 DDR4 記憶體模組 SATA 硬碟 SATA 光碟機(選購) 顯示卡(選購) 上表所列的工具與元件並不包含在主機板包裝盒內。 xiii
xiv
產品介紹 1.1 主機板概述 1.1.
1.1.2 主機板結構圖 1 2 3 24.4cm(9.6in) 4 2 6 5 第一章 RGB_HEADER1 AIO_PUMP EATX12V_2 HDMI_DP CPU_FAN CPU_OPT 26 BOOT DIGI +VRM VGA CPU DRAM BIOS_FLBK 7 24 STRIX X570-e GAMING RTL 8125-CG 22110 20 ADD_GEN2_1 U32G2_C9 SPI_TPM M.2_1(SOCKET3) AUDIO CHA_FAN1 LED1_CON M.2(WIFI) 2280 2260 2242 8 30.
主機板元件說明 頁數 ATX 主機板電源插槽(24-pin EATXPWR、8-pin EATX12V) 1-19 2. 中央處理器風扇、中央處理器選用風扇及機殼風扇插座;水泵、M.2 風扇、一體式水泵風扇插座(4-pin CPU_FAN、4-pin CPU_OPT、4-pin CHA_FAN1-2、4-pin W_PUMP+、4-pin M.2_FAN、4-pin AIO_PUMP) 1-18 3. SPI TPM 連接排針(14-1 pin SPI_TPM) 1-21 4. AM4 中央處理器插槽 1-4 5. AURA RGB 燈條接頭(4-pin RGB_HEADER1/2) 1-11 6. DDR4 記憶體插槽 1-4 7. Q LED(CPU、DRAM、VGA、BOOT) 1-8 8. Addressable RGB 接頭(4-1 pin ADD_GEN2_1/2) 1-12 9. USB 3.2 Gen 2 前面板連接插槽(U32G2_C9) 1-15 10. M.2 插槽(M.2_1/2) 1-20 11.
1.1.3 中央處理器(CPU) 本主機板配備一組中央處理器插槽,是專為 A M4 封裝的第三代與第二代 A M D Ryzen™ / 第二代與第一代 AMD Ryzen™ with Radeon™ Vega Graphics 處理器所設計。 第一章 STRIX X570-e GAMING ROG STRIX X570-E GAMING CPU socket AM4 AM4 插槽有不同的腳位設計。請確認您使用的是專為 AM4 插槽設計的 CPU。處理器只能以一個方向正確安裝。請勿強制將處理器裝置插槽,以 避免弄彎處理器的針腳和處理器本身! 當您安裝 CPU 時,請確認所有的電源接頭都已拔除。 1.1.
第一章 記憶體建議設定 記憶體設定 您可以任意選擇使用 2GB、4GB、8GB 與 16GB 的 un-buffered DDR4 記憶體模組至 本主機板的記憶體插槽上。 • 您可以在通道 A、通道 B 安裝不同容量的記憶體模組。在雙通道設 定中,系統會偵測較低容量通道的記憶體容量。任何在較高容量通道 的其他記憶體容量,會被偵測為單通道模式執行。 • 本主機板不支援 512 Mb(64MB)晶片的記憶體模組(記憶體容量以 Megabit 計算,8 Megabit/Mb=1 Megabyte/MB)。 • 預設的記憶體運作頻率是依據其 SPD(Serial Presence Detect)。在 預設狀態下,某些記憶體在超頻時的運作頻率可能會較供應商所標示 的數值為低。 • 在全負載(4 DIMM)或超頻設定下,記憶體可能需要更佳的冷卻系 統以維持運作的穩定。 • 請安裝相同 CAS Latency 的記憶體模組。為求最佳相容性,建議您安 裝同廠牌、相同資料碼(D/C)版本的記憶體模組。請先與供應商確 認並購買正確的記憶體模組。 華碩 ROG STRIX X570-E GAMING 主板使用手冊 1-5
1.1.5 擴充插槽 安裝或移除任何擴充卡之前,請暫時先將電腦的電源線拔出。如此可免 除因電氣殘留於電腦中而發生的意外狀況。 第一章 STRIX X570-e GAMING PCIEX16_1 PCIE_X1_1 PCIEX16_2 PCIE_X1_2 PCIEX16_3 插槽編號 插槽說明 1-6 1 PCIe 4.0/3.0 x16_1 插槽 2 PCIe 4.0 x1_1 插槽 3 PCIe 4.0/3.0 x16_2 插槽 4 PCIe 4.0 x1_2 插槽 5 PCIe 4.
PCI Express 運作模式 第三代 AMD Ryzen™ 處理器 PCIe x16_1 PCIe x16_2 PCIe x16_3 M.2_1(PCIe 模式) M.2_1(SATA 模式) M.2_2(PCIe 模式) M.2_2(SATA 模式) PCI Express 運作模式 單張 VGA/PCIe 顯 二張 VGA/PCIe 顯 三張 VGA/PCIe 顯 示卡 示卡 示卡 x16(PCIe 4.0) x8(PCIe 4.0) x8(PCIe 4.0) 無 x8(PCIe 4.0) x8(PCIe 4.0) 無 無 x4(PCIe 4.0) x4(PCIe 4.0) x4(PCIe 4.0) x4(PCIe 4.0) 支援 支援 支援 x4(PCIe 4.0) x4(PCIe 4.0) x4(PCIe 4.0) 支援 支援 支援 第一章 插槽說明 第二代 AMD Ryzen™ 處理器 插槽說明 PCIe x16_1 PCIe x16_2 PCIe x16_3 M.2_1(PCIe 模式) M.2_1(SATA 模式) M.2_2(PCIe 模式) M.
1.1.6 內建 LED 指示燈 1. Q LED(CPU、DRAM、VGA、BOOT) 第一章 Q LED 從主機板開機後依序檢視 CPU、記憶體、顯示卡與開機裝置狀態。當發 現錯誤時,在該項目旁的指示燈則會亮燈直到問題解決。透過直覺的方式提供這 項友善的設計,能在短短幾秒內找到問題點。 BOOT (YELLOW GREEN) VGA (WHITE) CPU (RED) DRAM (YELLOW) STRIX X570-e GAMING ROG STRIX X570-E GAMING CPU/ DRAM/ BOOT/ VGA LED LED指示燈亮燈的順序會依 CPU 不同而異。 2.
3. PCH 指示燈 第一章 本主機板配備六個電源指示燈。請參考下圖所示。 STRIX X570-e GAMING PCH LED Lighting ROG STRIX X570-E GAMING PCH_LED Lighting 4.
1.1.7 接頭 1. CMOS 組態資料清除(2-pin CLRTC) 這個接頭可讓您清除 CMOS 的 Real Time Clock(RTC)記憶體中的資料,像是 日期、時間與系統設定參數。 第一章 STRIX X570-e GAMING +3V_BAT GND CLRTC PIN 1 ROG STRIX X570-E GAMING Clear RTC RAM 想要清除這些資料,可以依照下列步驟進行: 1. 關閉電腦電源,拔掉電源線; 2. 用一個金屬物體,如螺絲起子,將 CLRTC 接頭的兩個針腳短路。 3. 插上電源線,開啟電腦電源; 4.
2.
3.
4. 溫度感應線連接排針(2-pin T_SENSOR) 第一章 此插座為連接溫度感應線,可以讓您監控主機板重要元件和連接裝置的溫度。 STRIX X570-e GAMING T_SENSOR GND PIN 1 SENSOR IN ROG STRIX X570-E GAMING T_SENSOR connector 1.1.8 內部連接埠 1.
2. AMD Serial ATA 6Gb/s 裝置連接插槽(7-pin SATA6G_1-8) 這些插槽可支援使用 Serial ATA 6.
3. USB 3.2 Gen 2 前面板連接插槽(U31G2_C9) 第一章 這個插槽用來連接 USB 3.2 Gen 2 模組以擴充 USB 3.2 Gen 2 模組。USB 3.2 Gen 2 的資料傳輸率最高可達 10Gbps。新一代 USB 標準可向下相容現有 USB 裝 置。 U32G2_C9 STRIX X570-e GAMING SBU2 SBU1 CC1 VBUS RX1RX1+ GND TX1TX1+ VBUS VBUS TX2+ TX2GND RX2+ RX2GND DD+ CC2 ROG STRIX X570-E GAMING USB3.2 Gen2 front panel connector USB 3.2 Gen 2 模組為選購配備,請另行購買。 4. USB 3.2 Gen 1 擴充套件連接插槽(20-1 pin U32G1_1011) 這些插槽用來連接 USB 3.2 Gen 1 模組,可在前面板或後側連接埠擴充 USB 3.2 Gen 1 模組。當您安裝 USB 3.2 Gen 1 模組,您可以享受 USB 3.
5. USB 2.0 擴充套件排線插槽(10-1 pin USB12、USB34) 這些 USB 擴充套件排線插槽支援 USB 2.0 規格。將 USB 模組排線連接至任 何一個插槽,然後將模組安裝到機殼後側面板中開放的插槽。這些 USB 插槽與 USB 2.0 規格相容,並支援傳輸速率最高達 480MBps。 第一章 USB34 USB12 USB+5V USB_P1USB_P1+ GND NC PIN 1 USB+5V USB_P2USB_P2+ GND PIN 1 USB+5V USB_P4USB_P4+ GND USB+5V USB_P3USB_P3+ GND NC STRIX X570-e GAMING ROG STRIX X570-E GAMING USB2.0 connectors 請勿將 1394 排線連接到 U S B 插槽上。這麼做可能會導致主機板的損 毀! 6.
7.
8. 中 央處理器風扇、中央處理器選用風扇、機殼風扇、M.2 及機殼風扇電源插槽 (4-pin CPU_FAN、4-pin CPU_OPT、3-pin COV_FAN、4-pin AIO_PUMP、4-pin W_PUMP+、4-pin M.
9.
10. M.2 插槽(M.2_1、M.2_2) 這個插槽用來安裝 M.2 固態硬碟。 A 第一章 M.2_1(SOCKET3) 22110 2280 2260 2242 B STRIX X570-e GAMING M.2_2(SOCKET3) A 22110 2280 2260 2242 B ROG STRIX X570-E GAMING M.2 sockets • 對於第三代 AMD Ryzen™ 處理器,M.2 插槽支援 PCIe 4.0 x4 模式與 SATA 模式 M Key 的 2242 / 2260 / 2280 / 22110 類型儲存裝置。 • 對於第二代 AMD Ryzen™ / 第二代與第一代 AMD Ryzen™ with Radeon™ Vega Graphics 處理器,M.2 插槽支援 PCIe 3.0 x4 與 SATA 模式 M Key 的 2242 / 2260 / 2280 / 22110 類型儲存裝置。 • 對於 AMD X570 晶片組,M.2 插槽支援 PCIe 4.
11. SPI TPM 連接排針(14-1 pin SPI_TPM) 第一章 這個插座支援可信任安全平台模組(T P M)系統,用來安全地儲存金鑰、數 位認證、密碼和資料。可信任安全平台模組(TPM)系統也用來協助加強網路安 全,保護數位身份,以及確保平台的安全性。 SPI_TPM PIN 1 STRIX X570-e GAMING +1.8V TPM PLTRST# +18V SPI SPI CS# SPI MISO SPI HOLD# SPI TPM IRQ# SPI TPM CS# SPI FLASH WP# GND SPI CLK SPI MOSI ROG STRIX X570-E GAMING SPI TPM connector SPI TPM 模組為選購配備,請另行購買。 12.
13.
第二章:硬體裝置資訊 硬體裝置資訊 2.1 建立您的電腦系統 2 本章節的圖示僅供參考。主機板的構造可能會隨著型號而有所不同,但 是安裝的步驟仍然是相同的。 2.1.1 安裝主機板 將主機板放入機殼,並確認後側 I/O 連接埠對齊機殼的後側 I/O 面板。 2. 移除 PCH 蓋板上的固定螺絲(A),然後移除 PCH 蓋板(B)。 第二章 1.
第二章 3. 移除 M.2 散熱片上的固定螺絲(A),然後移除 M.2 散熱片(B)。 4.
2.1.
2.1.
處理器散熱片與風扇安裝類型二 2 第二章 1 3 當使用這種類型的中央處理器風扇時,僅移除螺絲與支撐模組。請勿移 除背面的金屬板。 華碩 ROG STRIX X570-E GAMING 主機板使用手冊 2-5
安裝 AIO 散熱器 第二章 AIO_PUMP CPU_FAN CPU_OPT 2-6 第二章:硬體裝置資訊
安裝記憶體模組 第二章 2.1.
2.1.5 安裝 ATX 電源 A B 或 第二章 • 及 請勿僅連接 4-pin 電源插頭,主機板在高負載下可能過熱。 • 請務必連接 8-pin 電源插頭,或同時連接 8-pin 及 4-pin 電源插頭。 2.1.
2.1.7 安裝前面板輸出/輸入連接埠 安裝前面板音效連接插座 安裝 USB 3.2 Gen 2 連接插座 USB 3.2 Gen2 安裝 USB 2.0 連接插座 第二章 本插座僅能以一個方向插入。請 將插頭壓入插座直到卡入定位。 安裝前面板音效連接插座 AAFP USB 2.
2.1.
2.1.9 安裝 M.2 支援的 M.2 類型會依主機板而異。 安裝 M.2 3 3 4 4 5 5 6 3 3 4 4 5 5 6 6 3 4 5 6 請先移除 PCH 蓋板及 M.
2.1.
2.2 BIOS 更新公用程式 USB BIOS Flashback USB BIOS Flashback 提供最簡單更新 BIOS 的方法。使用者可以輕鬆嘗試使用新的 BIOS 版本來進行超頻,不需要進入 BIOS 或作業系統,只要插入 USB 儲存裝置然後 按下 BIOS Flashback 按鈕三秒鐘,BIOS 程式就會自動在待機狀態下更新。 請依照以下步驟使用 USB BIOS Flashback: 1. 將 USB 儲存裝置插入 USB Flashback 連接埠。 2. 造訪 https://www.asus.com/support/ 下載適用於本主機板的最新 BIOS 版本。 3. 將檔案重新命名為 SX570EG.CAP,接著複製至您的 USB 儲存裝置。 4. 將電腦關機。 5. 按下主機板上的 BIOS Flashback 按鈕約 3 秒鐘直到 Flashback 指示燈閃爍 3 次, 表示 BIOS Flashback 功能已經啟動。 USB BIOS Flashback 按鈕 6.
2.3 主機板後側與音效連接埠 2.3.1 後側面板連接埠 1 2 12 11 3 10 4 9 5 8 7 6 第二章 後側面板連接埠 1. DisplayPort 連接埠 2. USB 3.2 Gen 2 連接埠 1~4 3. 2.5G RJ-45 網路連接埠* 4. RJ-45 網路連接埠* 5. Wi-Fi 802.11 a/b/g/n/ac/ax、Bluetooth V5.0 6. 音效輸出/輸入接頭** 7. 光纖 S/PDIF 輸出埠 8. USB 3.2 Gen 2 Type-C 連接埠 C8 9. USB 3.2 Gen 2 連接埠 7 10. USB 3.2 Gen 2 連接埠 5 與 6 11. USB BIOS Flashback 按鈕 12. HDMI 連接埠 * 與 **:請參考下表中網路連接埠指示燈與音效連接埠的定義。 • USB 3.2 Gen 2/Gen 1 裝置只能用作資料儲存。 • 強烈建議您將裝置連接到對應傳輸速率的連接埠。強烈建議您將 USB 3.2 Gen 2 裝置連接至 USB 3.
* 網路指示燈說明 ACT/LINK 速度 指示燈 指示燈 速度指示燈 狀態 說明 狀態 說明 關閉 沒有連線 關閉 連線速度 10Mbps 橘色 已連線 橘色 連線速度 100Mbps 閃爍 資料傳送中 綠色 連線速度 1Gbps Realtek RTL8125-CG 2.5G 網路連接埠指示燈 RJ-45 網路 連接埠 ACT/LINK 指示燈 ACT/LINK 指示燈 速度指示燈 狀態 說明 狀態 說明 關閉 沒有連線 關閉 連線速度 100Mbps 綠色 已連線 綠色 連線速度 2.5Gbps 閃爍 資料傳送中 橘色 連線速度 1Gbps / 100Mbps / 10Mbps 速度 指示燈 RJ-45 網路 連接埠 ** 2.1、4.1、5.1 或 7.1 聲道音效設定 連接埠 耳機/ 2.1 聲 道 4.1 聲道 5.1 聲道 7.
2.3.
連接 4 聲道喇叭 第二章 連接 5.1 聲道喇叭 連接 7.
2.3 第一次啟動電腦 1. 確認所有排線與接腳都接妥,然後蓋上機殼的外蓋。 2. 確定所有的開關都已關閉。 3. 將電源線接上機殼背面的電輸入插座。 4. 情況許可的話,最好將電源線路上加接突波吸收/保護器。 5. 您可以先開啟以下周邊的電源: 6. a. 顯示器 b. 外接式 SCSI 接頭周邊裝置(從串連的最後端開始) c. 系統電源 送電之後,機殼面板上應該會有電源指示燈亮起才對。如果是使用 ATX 電源的 話,必須等到面板按鈕被觸碰後才會啟動電源,電源指示燈此時才會亮起。如果 您的電腦符合綠色省電標準,已隨時準備可以進入省電模式的話,顯示器指示燈 也會亮起。 第二章 系統將進行開機自我測試(POST)。如果啟動過程一切順利的話,不久就可以在 顯示器上看到畫面了, 如果送電之後超過 30 秒而畫面未有動靜的話,表示電腦 的設定尚有問題存在。請再進一步地的檢查各項動作,如果還是不行,就需要向 廠商求助了! 7.
第三章:BIOS 程式設定 BIOS 程式設定 3.
3.
3.2.
功能表列 BIOS 設定程式最上方各選單功能說明如下: My Favorites 本項目將記錄時常使用的系統設定及設定值。 Main 本項目提供系統基本設定 Ai Tweaker 本項目提供超頻設定 Advanced 本項目提供系統進階功能設定 Monitor 本項目提供溫度、電源及風扇功能設定。 Boot 本項目提供開機磁碟設定 Tool 本項目提供特殊功能設定 Exit 本項目提供離開 BIOS 設定程式與出廠預設值還原功能 選單項目 於功能表列選定選項時,被選擇的功能將會反白。如選擇「Main」選單所出現的項 目。 點選選單中的其他項目(例如:Ai Tweaker、Advanced、Monitor、Boot 與 Exit) 也會出現該項目不同的選項。 子選單 在選單畫面中,若功能選項前面有一個小三角形標記,代表此為子選單。您可利用 方向鍵來選擇,並按下 鍵來進入子選單。 語言 這個按鈕位在功能表列的上方,用來選擇 BIOS 程式介面顯示的語言。點選這個按 鈕來選擇您想要的 BIOS 畫面顯示語言。 我的最愛(F3) 第三章 這個按鈕位在功能表列的
搜尋(F9) 這個按鈕用來依照 B I O S 項目名稱進行搜尋,輸入項目名稱可找到相關的項目條 列。 AURA(F4) 本項目用來關閉或開啟 RGB LED 指示燈。 [All On] 所有 AURA 特效將開啟 (預設模式) [Stealth Mode] 所有指示燈(Aura 及功能性指示燈)將關閉 [Aura Only] AURA 指示燈將開啟,而功能性指示燈將關閉 [Aura Off]: AURA 指示燈將關閉,而功能性指示燈仍然開啟 搜尋常見問題解答 將滑鼠移至此按鈕可顯示一個 QR Code,您可以透過行動裝置掃描此 QR Code,立 即進入華碩官方論壇,以解決您的相關問題。您也可以直接掃描下方的 QR Code。 快速鍵 這個按鈕位在功能表列的上方,包含有 BIOS 程式設定的導引方向鍵。使用箭頭按 鍵來選擇選單中的項目並變更設定。 捲軸 第三章 在選單畫面的右方若出現如右圖的捲軸畫面,即代表此頁選項超過可顯示的畫面。 您可利用上/下方向鍵或是 PageUp/PageDown 鍵來切換畫面。 項目說明 在選單畫面的底部為目前所選擇的作用選項的功能說明,此說明會依選項的不
3.2.
3.2.
手動設定風扇 從設定檔清單中選擇 Manual 來手動設定風扇運作的速度。 速度點 點選以手動設定風扇 請依照以下步驟設定風扇: 第三章 3-8 1. 選擇想要設定的風扇並查看該風扇現在的狀況。 2. 點選並拖曳速度點來調整風扇的運作速度。 3.
3.2.4 EZ Tuning Wizard E Z T u n i n g 精靈用來超頻處理器和記憶體模組、電腦使用與處理器風扇至最佳設 定。 超頻設定 超頻設定 請依照以下步驟進行超頻設定: 1. 在鍵盤按下 鍵或在 B I O S 程式畫面中點選 Tuning 精靈視窗,然後點選 Next。 2.
3. 選擇安裝的處理器風扇類型(Box cooler、Tower cooler、Water cooler 或 I'm not sure),然後點選 下一步(Next)。 4. 選擇處理器風扇類型後,點選 下一步(Next) 接著再點選 確定(Yes) 來繼續 OC Tuning 設定。 3.
新增項目至我的最愛 請依照以下步驟新增項目至我的最愛: 1. 在鍵盤按下 鍵或在 BIOS 程式畫面中點選 圖畫面。 2. 在設定樹狀圖畫面中選擇想要儲存至我的最愛的 BIOS 項目。 來啟動設定樹狀 主選單面板 已選擇的捷徑項目 子選單面板 刪除所有最愛項目 還原至預設最愛項目 3. 從主選單面板選擇項目,然後點選子選單中想要儲存至我的最愛的選項,再點選 或是按下 按鍵。 4. 點選 Exit (ESC) 或按下 鍵來關閉樹狀圖視窗。 5.
3.4 主選單(Main) 當您進入 BIOS 設定程式的進階模式(Advanced Mode)時,首先出現的第一個畫 面即為主選單。主選單顯示系統資訊概要,用來設定系統日期、時間、語言與安全設 定。 安全性選單(Security) 本選單可讓您改變系統安全設定。 • 若您忘記設定的 BIOS 密碼,可以採用清除 CMOS 即時時脈(RTC) 記憶體。請參考 1.1.7 接頭 一節的說明。 • Administrator 或 User Password 項目預設值為 [Not Installed], 當您 設定密碼之後將顯示為 [Installed]。 3.
Custom CPU Core Ratio 本項目用來設定自訂的 CPU 核心倍頻。CPU 核心倍頻以 2 * FID / DID 公式計算。 設定值有:[Auto] [Manual] 以下項目只有在 Custom CPU Core Ratio 設定為 [Manual] 才會出現。 FID 本項目用來設定核心頻率乘數。您可以使用 <+> 與 <-> 鍵調整數值。 DID 本項目用來設定核心頻率除數。您可以使用 <+> 與 <-> 鍵調整數值。 EPU Power Saving Mode 華碩 EPU 將 CPU 設為最低功耗。開啟本項目可設定較低的 CPU 核心/快取電壓以 達到最佳的省電效果。設定值有:[Disabled] [Enabled] TPU 本項目用來自動調整 CPU 及記憶體的頻率與電壓,以獲得最佳化系統效能。 [Keep Current Settings] 本項目用來維持原來的設定值。 [TPU I] 本項目適用於風冷超頻狀態。 [TPU II] 本項目適用於水冷超頻狀態。 若要將 TPU 開關設定為 [TPU_II],請使用水冷裝置。 進階選單(Advanced) 進階選單可讓您
PSS Support 本項目用來開啟或關閉 A C P I_P P C、 _P S S 與 _P C T 對象的產生。設定值有: [Disabled] [Enabled] NX Mode 本項目用來開啟或關閉不可執行頁面保護功能。 設定值有:[Disabled] [Enabled] SVM Mode 本項目用來開啟或關閉 CPU 虛擬化。 設定值有:[Disabled] [Enabled] Core Leveling Mode 本項目用來更改系統運算單元的數量。 設定值有:[Automatic mode] [One Computer Unit] 3.6.3 Bixby IDE Configuration 本選單中的項目可用來設定 Bixby IDE 裝置。 3.6.
Hot Plug 這些項目僅當 SATA Mode Selection 設定為 [AHCI] 時才會顯示,並且提供您啟 用或關閉支援 SATA Hot Plug(熱抽換)功能。設定值有:[Disabled] [Enabled] 3.6.5 內建裝置設定(OnBoard Devices Configuration) 本項目可讓您切換 PCIe 通道並進行內建裝置設定。 HD Audio Controller 本項目讓您使用 Azalia 高傳真音效控制器。設定值有:[Disabled] [Enabled] PCIEX16_2 Bandwidth 本項目用來設定 PCIEX16_2 模式。設定值有:[X8 Mode] [PCIe RAID Mode] [X8 Mode] PCIe x16_2 插槽的裝置可運作至 x8 模式。 [PCIe RAID Mode] PCIe x16_2 插槽的裝置可運作至 x4 + x4 模式,此時您可 以建立二個 PCIe 裝置的 RAID 陣列。 僅當 PCIe 插槽安裝了 Hyper M.2 x16 卡或其他 M.
系統在睡眠、休眠或軟關機狀態時 當系統在睡眠、休眠或軟關機狀態時,本項目用來關閉或開啟 RGB LED 指示 燈。設定值有:[All On] [Stealth] [Aura Only] [Aura Off] Realtek 2.5G LAN Controller 本項目用來開啟或關閉 Realtek 2.
3.6.7 PCI 子系統設定(PCI Subsystem Setting) SR-IOV Support 本項目可用來開啟或關閉 Single Root IO Virtualization 支援(若您的系統有支援 SR-IOV 的 PCIe 裝置)。設定值有:[Disabled] [Enabled] 3.6.
3.7 監控選單(Monitor) 監控選單可讓您檢視系統溫度/電力狀態,並可用來變更風扇設定。 Q-Fan 設定(Q-Fan Configuration) 本選單中的子項目用來設定 Q-Fan 功能。 Qfan Tuning 點選本項目會自動偵測最低速度並設定每個風扇的最小工作週期。 3.
Boot from PCI-E/PCI Expansion Devices [Legacy only] 本項目用來選擇想要執行的 PCI-E/PCI 擴充裝置類型。設定值有:[Ignore] [Legacy only] [UEFI only] Secure Boot 本項目用來設定 Windows® 安全啟動的相關參數以及管理系統金鑰,以提升系統在 開機自我偵測(POST)時的安全性,避免受到未授權的使用者與惡意軟體的危害。 Boot Option Priorities 本項目讓您自行選擇開機磁碟並排列開機裝置順序。螢幕上顯示的裝置項目數量將 視系統中安裝的裝置數量而定。 • 欲進入 Windows ® OS 安全模式時,請在開機自我偵測(POST)時 按下 。 • 開機時您可以在 ASUS Logo 出現時按下 選擇啟動裝置。 Boot Override 本項目將顯示可使用的裝置,螢幕上顯示的裝置項目數量將視系統中安裝的裝置數 量而定。點選任一裝置可將該裝置設定為開機裝置。 3.
請至華碩官網查詢支援華碩安全清除功能的固態硬碟的完整列表。若在 不相容的固態硬碟上執行華碩安全清除功能,硬碟可能會變得不穩定。 對固態硬碟進行安全清除資料時, 請勿將電腦關機或重新啟動。 可執行的固態硬碟 (SSD) 狀態說明 : 第三章 • Frozen:當選取的磁碟機狀態為 Frozen 時,不能執行安全清除。若 要移除鎖定,應對 SSD 執行一次開機循環。透過將磁碟機先拔除後 再插入即可完成此操作。 • L o c k e d:為避免無法順利於 S S D 執行安全清除,在執行安全清 除時,請先解開已由華碩設定密碼的第三方軟體(T h i r d-p a r t y software)。 3-20 第三章:BIOS 程式設定
3.9.3 ASUS User profile 本選單可以讓您儲存或載入 BIOS 設定。 Load from Profile 本項目可以讓您載入先前儲存在 BIOS Flash 中的 BIOS 設定。輸入一個儲存在BIOS 設定中的設定檔編號,然後按下 鍵並 選擇 Yes 來載入檔案。 • 當進行 BIOS 更新時,請勿關閉或重新啟動系統以免造成系統開機失 敗! • 建議您只在相同的記憶體/處理器設定與相同的 BIOS 版本狀態下,更 新 BIOS 程式。 Profile Name 本項目用來輸入設定檔名稱。 Save to Profile 本項目可以讓您儲存目前的 BIOS 檔案至 BIOS Flash 中,並建立一個設定檔。從 1 至 8 選擇一個設定檔編號並輸入該編號,然後按下 鍵,接著選擇 Yes。 Load/Save Profile from/to USB Drive 本項目可以由 USB 儲存裝置載入或儲存設定檔,或是載入或儲存設定檔至 USB 儲 存裝置。 3.9.
3.10 離開 BIOS 程式(Exit) 本選單可讓您讀取 BIOS 程式出廠預設值與離開 BIOS 程式。你也可以由 Exit 選單 進入 EZ Mode。 Load Optimized Defaults 本項目可讓您載入 BIOS 程式設定選單中每個參數的預設值。當您選擇本項目或按 下 ,便會出現一個確認對話視窗。選擇 OK 以載入預設值。 Save Changes & Reset 當您完成對 BIOS 設定程式所做的變更後,本項目用來儲存您所做的設定。當您選 擇本項目或按下 ,便會出現一個確認對話視窗。請選擇 OK 以儲存設定並離開 BIOS 設定程式。 Discard Changes & Exit 本項目可讓您放棄所做的變更,並回復原先儲存的設定。在選擇本項目或按下 鍵後,將會出現一個確認對話視窗。請選擇 Yes 以放棄任何設定並載入原先儲 存的設定,同時離開 BIOS 設定程式。 Launch EFI Shell from USB drives 本項目可以讓您由含有資料系統的裝置中啟動 EFI Shell(shellx64.efi)。 3.
3.11.2 華碩 EZ Flash 3 華碩 EZ Flash 3 程式讓您能輕鬆的更新 BIOS 程式,可以不必再透過開機片的冗長 程序或是到 DOS 模式下執行。 利用網際網路更新會因區域及連線情況而異。更新前請確認網路連線。 1. 進入 BIOS 設定程式的 Advanced Mode, 選擇 Tool > ASUS EZ Flash 3 Utility, 接著請按下 鍵。 2. 將儲存有最新 BIOS 檔案的 USB 隨身碟插入 USB 連接埠。 3. 選擇 via Storage Devices。 4. 按 鍵切換到 Drive 區域。 5. 按上/下方向鍵找到儲存有最新 BIOS 檔案的 USB 隨身碟,然後按下 <Enter> 鍵。 6. 按 鍵切換到 Folder Info 區域。 7.
• 本功能僅支援採用 FAT 32/16 格式的單一磁區 USB 隨身碟。 • 當進行 BIOS 更新時,請勿關閉或重新啟動系統以免造成系統開機失 敗! 請讀取出廠預設值來保持系統的穩定。在 E x i t 選單中選擇 L o a d Optimized Defaults 項目來回復 BIOS 預設設定。請參閱 3.10 離開 BIOS 程式 一節中的詳細說明。 請依照以下步驟透過網際網路更新 BIOS 程式: 進入 BIOS 設定程式的 Advanced Mode,選擇 Tool > ASUS EZ Flash 3 Utility, 接著請按下 鍵。 2. 選擇 via Internet。 3. 按左/右方向鍵選擇一種網際網路連線方式,然後按下 <Enter> 鍵。 4. 按照螢幕提示完成更新。 5. 更新完成後重新啟動電腦。 第三章 1. 請讀取出廠預設值來保持系統的穩定。在 E x i t 選單中選擇 L o a d Optimized Defaults 項目來回復 BIOS 預設設定。請參閱 3.
3.11.3 華碩 CrashFree BIOS 3 華碩最新自行研發的 CrashFree BIOS 3 工具程式,讓您在當 BIOS 程式與資料被病 毒入侵或損毀時,可以輕鬆地從驅動程式與公用程式光碟中,或是從含有最新或原始 BIOS 檔案的 USB 隨身碟中回復 BIOS 程式的資料。 在驅動程式及公用程式光碟中的 BIOS 程式版本可能會比官方網站上的 BIOS 程式版本舊,若是想要使用更新的 BIOS 程式,請至 https://www. asus.com/tw/support/ 網站下載,並儲存在可攜式儲存裝置中。 回復 BIOS 程式: 請依據下列步驟回復 BIOS 程式: 1. 啟動系統。 2. 將主機板的公用程式光碟放入光碟機,或是將含有最新或原始的 B I O S 檔案的 USB 隨身碟插入 USB 連接埠。 3. 接著工具程式便會自動檢查裝置中是否存有 BIOS 檔案。當搜尋到 BIOS 檔案後, 工具程式會開始讀取 BIOS 檔案並自動進入 EZ Flash 3 公用程式。 4.
第三章 3-26 第三章:BIOS 程式設定
第四章:RAID 支援 RAID 支援 4.1 AMD RAID 功能設定 4 本主機板搭配 RaidXpert2 Configuration Utility,可支援 Volume、RAIDABLE、RAID 0、RAID 1 和 RAID 10(取決於系統許可)磁碟陣列設定。 關於 RAID 陣列設定的更多詳細內容,請至 https://www.asus.com/tw/ support 查閱 RAID 設定指南。 4.1.
第四章 4-2 第四章:RAID 支援
A 附錄 附錄 Q-Code 表 代碼 說明 00 Not used 01 Power on. Reset type detection (soft/hard).
Q-Code 表 代碼 說明 E0 S3 Resume is stared (S3 Resume PPI is called by the DXE IPL) E1 S3 Boot Script execution E2 Video repost E3 OS S3 wake vector call E4 – E7 Reserved for future AMI progress codes E8 S3 Resume Failed E9 S3 Resume PPI not Found EA S3 Resume Boot Script Error EB S3 OS Wake Error EC – EF Reserved for future AMI error codes F0 Recovery condition triggered by firmware (Auto recovery) F1 Recovery condition triggered by user (Forced recovery) F2 Recovery process started
Q-Code 表 代碼 說明 90 Boot Device Selection (BDS) phase is started 91 Driver connecting is started 92 PCI Bus initialization is started 93 PCI Bus Hot Plug Controller Initialization 94 PCI Bus Enumeration 95 PCI Bus Request Resources 96 PCI Bus Assign Resources 97 Console Output devices connect 98 Console input devices connect 99 Super IO Initialization 9A USB initialization is started 9B USB Reset 9C USB Detect 9D USB Enable 9E – 9F Reserved for future AMI codes A0 IDE initiali
Q-Code 表 Code Description B4 USB hot plug B5 PCI bus hot plug B6 Clean-up of NVRAM B7 Configuration Reset (reset of NVRAM settings) B8– BF Reserved for future AMI codes D0 CPU initialization error D1 System Agent initialization error D2 PCH initialization error D3 Some of the Architectural Protocols are not available D4 PCI resource allocation error.
Notices FCC Compliance Information Responsible Party: Address: Phone / Fax No: Asus Computer International 48720 Kato Rd., Fremont, CA 94538, USA (510)739-3777 / (510)608-4555 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
華碩的連絡資訊 華碩電腦公司 ASUSTeK COMPUTER INC.(台灣) 市場訊息 技術支援 地址: 台灣臺北市北投區立德路 150 號 4 樓 電話:+886-2-2894-3447 傳真:+886-2-2890-7798 全球資訊網:http://www.asus.com/tw/ 電話:+886-2-2894-3447(0800-093-456) 線上支援: http://www.asus.com/tw/support/ 華碩電腦公司 ASUSTeK COMPUTER INC.(亞太地區) 市場訊息 技術支援 地址: 台灣臺北市北投區立德路 15 號 電話:+886-2-2894-3447 傳真:+886-2-2890-7798 全球資訊網:http://www.asus.com/tw/ 電話:+86-21-38429911 傳真: +86-21-58668722, ext. 9101# 線上支援: http://www.asus.