User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 CPU Configuration
- 6.4 PCI Subsystem Settings
- 6.5 USB Configuration
- 6.6 Network Stack Configuration
- 6.7 NVMe Configuration
- 6.8 HDD/SSD SMART Information
- 6.9 SATA Configuration
- 6.10 APM Configuration
- 6.11 Onboard Devices Configuration
- 6.12 NB Configuration
- 6.13 AMD CBS
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 6.16 RAIDXpert2 Configuration Utility
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
40
ROG STRIX X670E Series BIOS Manual
USB Single Port Control
Allows you to enable or disable the individual USB ports.
Refer to section Motherboard layout and Rear I/O connection in your motherboard’s
user manual for the location of the USB ports.
6.6 Network Stack Configuration
The items in this menu allow you to change the Network Stack Configuration.
Network stack
Configuration options: [Disabled] [Enabled]
The following items appear only when Network Stack is set to [Enabled].
Ipv4/Ipv6 PXE Support
Configuration options: [Disabled] [Enabled]
6.7 NVMe Configuration
This menu displays the NVMe controller and Drive information of the connected devices.
You may press <Enter> on a connected NVMe device which appears in this menu to view
more information on the NVMe device.
The options displayed in this menu may vary depending on the devices connected to your
motherboard. Please refer to the BIOS of your motherboard for the actual settings and
options.