User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 CPU Configuration
- 6.4 PCI Subsystem Settings
- 6.5 USB Configuration
- 6.6 Network Stack Configuration
- 6.7 NVMe Configuration
- 6.8 HDD/SSD SMART Information
- 6.9 SATA Configuration
- 6.10 APM Configuration
- 6.11 Onboard Devices Configuration
- 6.12 NB Configuration
- 6.13 AMD CBS
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 6.16 RAIDXpert2 Configuration Utility
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
54
ROG STRIX X670E Series BIOS Manual
The following item appears only when TwtrL Ctrl is set to [Manual].
TwtrL
Specifies the Minimum Write to Read Time, the same bank group.
Valid values: 0x8 ~ 0x30. The value is in hex.
TwtrS Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TwtrS Ctrl is set to [Manual].
TwtrS
Specifies the Minimum Write to Read Time, different bank group.
Valid values: 0x2 ~ 0x10. The value is in hex.
TrdrdScL Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TrdrdScL Ctrl is set to [Manual].
TrdrdScL
Specifies the CAS to CAS delay time, same bank group. Valid values:
0x1 ~ 0xF. The value is in hex.
TrdrdSc Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TrdrdSc Ctrl is set to [Manual].
TrdrdSc
Specifies the Read to Read turnaround timing in the same chipselect.
Valid values: 0x1 ~ 0xF. The value is in hex.
TrdrdSd Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TrdrdSd Ctrl is set to [Manual].
TrdrdSd
Specifies the Read to Read turnaround timing in the same DIMM.
Valid values: 0x1 ~ 0xF. The value is in hex.
TrdrdDd Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TrdrdDd Ctrl is set to [Manual].
TrdrdDd
Specifies the Read to Read turnaround timing in a different DIMM.
Valid values: 0x1 ~ 0xF. The value is in hex.